Cable gender changer InLine 92504L — audio/video adapter, model 92504L

The InLine 92504L cable gender changer provides a solderless 6.35 mm TRS (stereo, 3-pin) jack plug on a side-mounted terminal block for fast, compact connection of analog audio signals. Screw terminals with pressure plates accept 18–26 AWG conductors and are tool-assisted with a flat-head screwdriver ≤ 2.5 mm. Terminal assignments are clearly marked as L (left), R (right) and + (common/shield), and an EVA insulation layer on the underside protects when mounted on conductive surfaces.

Advantages

Quick wiring via screw terminals saves installation time and supports reliable contact for audio and control signals. The lateral terminal strip on a 5.0 mm grid enables space-saving integration into distributors, test boxes or compact enclosures. Electrical specifications such as ≥10 MΩ insulation resistance at 300 V DC and a rated current of 1.0 A per pin ensure stable signal transmission in continuous operation.

Suitable for

• Prototyping and test setups in laboratories
• Audio interfaces and routing in multimedia equipment
• Control lines and measurement systems with 6.35 mm interfaces
• Compact distributors, rack-mounted units or mobile test fields

Key specifications

• Jack connection: 6.35 mm TRS jack plug (3-pin, stereo)
• Number of poles / terminal assignment: 3 / L, R, +
• Connection technology: Screw terminal with pressure plate, 5.0 mm pitch
• Connection range: 18–26 AWG
• Actuation: Flat-blade screwdriver ≤ 2.5 mm
• Rated current: 1.0 A per pin
• Max. operating voltage: 70 V between two signals
• Insulation resistance: ≥ 10 MΩ @ 300 V DC
• Max. conductor resistance: 5 Ω
• Operating temperature: –10 °C to +70 °C
• Insulation layer: EVA insulation on underside

How to use

Strip the cable conductors to the manufacturer-recommended length for 18–26 AWG, insert each conductor into the matching screw terminal marked L, R or +, and tighten the pressure-plate screw with a flat-head screwdriver (≤ 2.5 mm) until secure. Plug a 6.35 mm TRS male connector into the jack. Mount the unit in the intended location, ensuring the EVA insulation side faces any conductive surface.

Usage recommendations

For reliable long-term operation, route and secure cables to avoid mechanical strain on the terminals, observe the 1.0 A per-pin current limit, and avoid exposure beyond the specified temperature range (–10 °C to +70 °C). Verify correct terminal assignment (L, R, +) before powering connected equipment.