Caliper INSIZE 1106-601 digital 600 mm, 3V power, ABS, data output, 100 mm jaws, single-sided scale

Digital caliper INSIZE 1106-601 offers a 600 mm measuring range combined with 100 mm jaws and a single-sided scale. The tool uses a 3V battery and ABS (absolute) position sensing to retain zero point information when powered off. A data output port allows transfer of measured values to external devices for logging or quality control. The caliper is designed for external, internal and depth measurements and is intended for workshop, engineering and inspection applications where long-range precision is required.

Advantages

The INSIZE 1106-601 provides straightforward digital readout and ABS technology for reliable zero-point retention, reducing the need for repeated calibration after power cycles. Its 600 mm measuring range and 100 mm jaws expand the types of parts that can be measured compared with shorter calipers, and the data output simplifies measurement recording and traceability. The single-sided scale and robust construction support consistent handling in workshop environments.

Suitable for

• Measuring external dimensions of long components such as shafts, profiles or bars
• Internal hole and bore measurements within the caliper's range
• Depth measurements for slots and recesses up to the caliper's capacity
• Quality control and inspection where digital readout and data logging are required
• Engineering and workshop tasks that need an extended range caliper

When it may not be suitable

This caliper is large and intended for measurements up to 600 mm; it may be less convenient for very fine, short-range measurements where a smaller 150–200 mm caliper would be easier to handle. The single-sided scale offers less visibility from the opposite side, which could be a limitation in some fixturing situations. It requires a compatible data-logging setup to take full advantage of the data output feature.

Key specifications

• Measuring range: 600 mm
• Jaw length: 100 mm
• Power: 3V battery
• Position sensing: ABS (absolute)
• Scale type: single-sided
• Data interface: data output for external recording
• Measurement functions: external, internal, depth

How to use

Before measuring, ensure the sliding surfaces are clean and install the specified 3V battery. Zero the display at the closed-jaw position if needed; with ABS sensing the caliper retains absolute zero even after power off, but confirm zero before critical measurements. Open the jaws and position the workpiece for external measurements, use the inside jaws for bore measurements, or the depth rod for depth checks. Read the value on the digital display and, if required, transmit the reading through the data output to a compatible meter or computer for logging.

What to consider before purchase

• Ensure a 600 mm measuring range and 100 mm jaws meet the size of parts you will measure
• Confirm compatibility with your data-logging equipment to use the data output function
• Check whether a single-sided scale format is suitable for your fixturing and viewing needs
• Consider whether the physical size and weight are acceptable for your workshop workflows

Usage recommendations

Store the caliper in a protective case when not in use, keep measuring surfaces clean and free of debris, and avoid applying excessive force to the jaws. Use the data output with compatible software or interfaces for reliable record keeping and quality control.