Ceiling lamp Intelight Vella Zestaw DS PMMA 250x125, flush-mounted LED fixture, diffuser PMMA

Intelight Vella Zestaw DS PMMA 250x125 is a flush-mounted LED ceiling lamp designed to deliver uniform general illumination in indoor environments. The fixture uses a 250 x 125 mm PMMA diffuser to spread light evenly and reduce glare, making it suitable for corridors, kitchens, offices and other common interior spaces. The lamp is compatible with standard LED modules and can be used in both retrofit and new installation projects.

Advantages

The PMMA diffuser provides consistent light distribution and resists yellowing over time, maintaining colour stability. Flush-mounted design minimises visual intrusion and fits well with low ceilings. Compatibility with common LED modules allows flexible lumen and colour temperature choices, and the straightforward construction supports quick installation and maintenance.

Suitable for

• General ambient lighting in hallways and corridors
• Kitchen ceiling illumination where even light is required
• Office and workroom ceilings for uniform task lighting
• Retail aisles and reception areas with low to medium ceiling heights

When it may not be suitable

This flush-mounted fixture is not intended for outdoor or wet locations unless installed in an appropriately rated enclosure. It may not be the best choice for applications that require high-impact resistance or very high lumen output for large open spaces; in such cases recessed high-bay or surface-mounted high-output luminaires are more appropriate.

Key specifications

• Diffuser material: PMMA (acrylic)
• Diffuser dimensions: 250 x 125 mm
• Mounting type: flush-mounted ceiling installation
• Light source compatibility: standard LED modules (driver and module selection dependent on desired output)
• Typical applications: residential and commercial interior lighting

How to use

Install the Intelight Vella Zestaw DS into a suitably prepared ceiling aperture or onto a compatible mounting plate following local electrical codes. Connect to a suitable LED driver and select LED modules that match the fixture’s mechanical layout and thermal constraints. After wiring, secure the diffuser in place and verify correct operation and even light distribution. For retrofit installation, switch off power at the circuit breaker before replacing an existing fixture and confirm compatibility with the existing ceiling cut-out.

What to consider before purchase

• Required LED module type and driver compatibility for desired lumen output and colour temperature
• Ceiling depth and available clearance for flush-mounting
• Intended room size and mounting height to ensure sufficient illuminance
• IP rating requirement if installed in areas exposed to moisture or dust

Usage recommendations

Choose LED modules with appropriate lumen output and colour temperature for the task: warm white for residential spaces and neutral to cool white for work areas. Ensure the driver is properly rated and installed in a ventilated location to maintain longevity. Regularly clean the PMMA diffuser with a soft cloth and mild detergent to preserve light quality.