Drill bit Irwin SDS+ 6 mm IW2039376 for concrete

Irwin SDS+ 6 mm concrete drill bit IW2039376 is designed for rotary hammers to drill clean holes in concrete and masonry. With a 6 mm cutting diameter and an SDS+ shank, this accessory provides stable retention in compatible hammer drills and is intended for impact drilling where reliable bit seating and flute geometry help evacuate dust and debris. The bit is suitable for common construction and renovation tasks such as fixing anchors, through-drilling for pipes and conduits, and creating pilot holes for fasteners in solid substrates.

Advantages

The SDS+ 6 mm design ensures a secure fit in SDS+ chucks and efficient transfer of hammer energy for faster penetration in concrete. The carbide-tipped cutting head maintains edge strength and wear resistance during repeated use in masonry. Optimised flute geometry enables effective chip removal, reducing binding and improving drilling speed. The compact 6 mm diameter allows precise anchoring and minimal material removal where narrow holes are required.

Suitable for

• Drilling holes for wall plugs and concrete anchors
• Through-drilling for small-diameter pipes and electrical conduits
• Pilot holes for masonry fasteners and anchors
• Renovation and construction tasks in concrete, brick and blockwork

Key specifications

• Drill diameter: 6 mm
• Shank type: SDS+
• Intended material: concrete, masonry, brick and block
• Tip type: carbide-tipped cutting head
• Application: rotary hammer impact drilling

How to use

Install the bit into an SDS+ compatible rotary hammer according to the tool manufacturer's instructions, ensuring it locks securely. Mark the drilling point, start at low speed or with a locating punch if required, then engage the hammer function and apply steady pressure while allowing the tool to do the work. Withdraw the bit periodically to clear dust from the hole when drilling deep or through dense material. After use, clean debris from the flute and store in a dry place.

Usage recommendations

Use appropriate personal protective equipment including safety glasses, hearing protection and a dust mask. For reinforced concrete, inspect for rebar before drilling and use a suitable rebar detection method. Match drill diameter to the anchor or plug specifications to ensure secure fixings.