Drill Bit Irwin SDS+ 10 mm IW2039419 for concrete

Irwin SDS+ 10 mm drill bit IW2039419 is designed for drilling 10 mm diameter holes in concrete, masonry and reinforced concrete. The SDS+ shank provides a secure fit in compatible rotary hammers and optimises impact energy transfer for steady, efficient drilling. The bit's tip geometry and flute design support reliable removal of dust and debris during percussive drilling, making it suitable for construction and renovation tasks that require anchors, plugs or through-fixings.

Advantages

The SDS+ connection ensures fast insertion and positive locking in rotary hammers, reducing slippage and improving energy transmission to the cutting tip. A hardened tip geometry maintains cutting performance when drilling into abrasive materials, while the flute profile aids chip evacuation to sustain drilling speed and reduce clogging. The 10 mm diameter is a common size for anchor and plug installation, offering practical compatibility with standard fixings used in building work.

Suitable for

• Drilling 10 mm holes for anchors and plug fixings in concrete and masonry
• Creating through-holes in reinforced concrete for bolts and through-fixings
• General construction and renovation drilling where an SDS+ rotary hammer is used

Key specifications

• Shank type: SDS+ for use in compatible rotary hammers
• Drill diameter: 10 mm for standard anchor and plug sizes
• Intended materials: concrete, reinforced concrete and masonry
• Tip and flute design: hardened tip geometry with flutes for efficient dust removal

How to use

Select a rotary hammer with SDS+ chuck compatible with the 10 mm bit. Insert the drill bit fully into the chuck until it locks. Use the hammer or hammer-drill mode appropriate for the material and apply steady pressure without forcing the bit. For deep holes, withdraw the bit periodically to clear dust and prevent overheating. After drilling, remove dust from the hole before inserting anchors or plugs.

Usage recommendations

Use personal protective equipment such as safety glasses, hearing protection and dust mask when drilling. Match drill speed and hammering mode to the material: use percussive action for concrete and masonry. Replace the bit when cutting performance declines or if the tip becomes visibly worn or damaged to maintain hole quality and safety.