Paint Jedynka alkyd enamel for wood and metal black gloss 0.9 L

Jedynka alkyd enamel for wood and metal black gloss 0.9 L is an alkyd-based gloss paint formulated for application on wooden and metal substrates. Supplied in a 0.9 L can, this coating creates a hard, glossy black finish designed for decorative and protective use on interior and exterior elements. The formulation is intended to deliver good adhesion to prepared timber and metal surfaces and to provide a durable surface suitable for furniture, doors and fittings subjected to regular use.

Advantages

The alkyd composition ensures a smooth, high-gloss appearance and mechanical resistance once fully cured. This paint offers strong hiding power and color depth in black, while forming a tough film that resists light abrasion and moderate weathering. Its properties make it suitable for renovation and spot-repair work where a uniform gloss finish is required.

Suitable for

• Interior wooden furniture and cabinets
• Wooden and metal doors and skirtings
• Metal fittings, railings and frames
• Repair, renovation and touch-up of previously painted surfaces

Key specifications

• Volume: 0.9 L
• Type: Alkyd enamel
• Finish: Gloss (high gloss)
• Color: Black
• Suitable substrates: Wood and metal
• Application: Brush, roller or suitable spray equipment

How to use

Prepare surfaces by cleaning off dirt, grease and loose or flaking paint; sand glossy areas to promote adhesion and remove rust from metal with appropriate methods. Stir the can thoroughly before use to ensure an even consistency. Apply the enamel in thin, even coats, allowing adequate drying time between coats according to ambient temperature and humidity. For best results on bare wood or metal, use appropriate primer or undercoat compatible with alkyd systems before applying the topcoat. Clean tools with a suitable solvent immediately after use.

Usage recommendations

Work in a well-ventilated area and follow safety instructions on the product label. For exterior applications, ensure primer and substrate preparation meet exposure requirements. Test a small inconspicuous area if applying over existing coatings to confirm compatibility and final appearance.