Paint Jedynka Emalia alkidowa popielaty 0.9 L — alkyd enamel, grey, 0.9L

Jedynka Emalia alkidowa popielaty 0.9 L is an alkyd enamel paint formulated for protective and decorative coatings on metal and wood. Supplied in a 0.9-litre can, this grey alkyd enamel is intended for applications where a durable, glossy finish and good adhesion are required. The formulation reflects typical alkyd properties: moderate drying time, strong film formation, and resistance to mechanical wear. It can be used both indoors and outdoors when appropriate surface preparation and thinning are applied.

Advantages

This alkyd enamel delivers a smooth, even grey finish with good coverage in thin coats and reliable adhesion to properly prepared metal and wooden substrates. The paint forms a hard, resilient film that resists abrasion and retains gloss over time. Its formulation allows straightforward application by brush or roller and, for certain tasks, by spray after thinning. The product is suitable for maintenance and renovation works where a long-lasting protective layer is needed.

Suitable for

• Protective and decorative coating of metal elements such as gates, railings and frames
• Painting wooden objects including doors, window frames and exterior trim
• Interior and exterior renovation works requiring a durable enamel finish

Key specifications

• Type: alkyd enamel (oil-based)
• Colour: grey
• Volume: 0.9 litres
• Intended substrates: metal and wood
• Finish: enamel (semi-gloss to gloss depending on coat thickness)
• Application methods: brush, roller, spray (spray may require thinning)

How to use

Prepare surfaces by removing rust, old loose paint, grease and dust; sand glossy areas to promote adhesion and clean with a suitable solvent if necessary. For bare metal, apply an appropriate primer if required for enhanced corrosion protection. Stir the paint thoroughly before use to ensure uniform colour and consistency. Apply in thin, even coats, allowing recommended drying time between layers; multiple thin coats are preferable to one thick coat to achieve an even enamel finish. If spraying, thin according to the spray equipment manufacturer's guidance and test on a sample area.

Usage recommendations

Use in well-ventilated areas and follow the manufacturer's safety instructions on the can. Store in a cool, frost-free place and keep the lid tightly closed when not in use. Dispose of leftover product and containers according to local regulations for solvent-based coatings.