Paint Jedynka alkyd enamel dark green 0.9 L

Jedynka alkyd enamel dark green 0.9 L is a solvent-based alkyd enamel formulated for protective and decorative coatings on wood, metal and properly prepared surfaces. The product delivers a durable finish with visible gloss level that can be adjusted by application method and thinning. It is suitable for both interior and exterior use when surfaces are cleaned, degreased and primed according to material requirements.

Advantages

This alkyd enamel provides good adhesion to primed metal and prepared wood, offering mechanical resistance and weather protection after curing. The formulation results in a smooth, even film that resists mild abrasion and UV exposure typical for outdoor conditions. The paint can be applied by brush, roller or spray and dries to a consistent dark green shade that maintains color stability under normal use.

Suitable for

• Protective and decorative coating of interior woodwork such as doors, frames and furniture
• Coating of metal structures and gates after proper priming
• Refurbishment of prepared exterior wooden elements like garden furniture and fences
• Small-scale DIY projects requiring a durable dark green enamel finish

Key specifications

• Volume: 0.9 L
• Base: solvent-based alkyd
• Finish: glossy to semi-gloss depending on application and thinning
• Colour: dark green
• Application methods: brush, roller, spray
• Suitability: interior and exterior use after surface preparation and priming
• Performance: good adhesion, weather resistance and mechanical durability when applied correctly

How to use

Ensure surfaces are clean, dry and free of rust, loose paint, dust and grease. Sand wooden surfaces and remove dust; remove scale and treat metal with an appropriate primer. Stir the enamel thoroughly before use. Apply at recommended ambient temperature and humidity; thin only if necessary using the manufacturer-recommended thinner for alkyd products. Apply one or more coats to achieve uniform coverage, allowing adequate drying time between coats. Clean tools with solvent after use and allow the final coat to cure before subjecting the surface to heavy use.

Usage recommendations

For best durability on exterior metal or wood, use a compatible primer and follow manufacturer guidance on drying times and recoating intervals. When spraying, adjust viscosity and use appropriate respiratory protection. Store the product in a cool, well-ventilated place away from direct heat and sources of ignition.