Paint Jedynka alkyd enamel for wood and metal, light green, glossy, 0.36 L

Jedynka alkyd enamel for wood and metal in light green is a glossy finishing paint formulated for small-scale coating and repair tasks on interior and exterior surfaces. Supplied in a 0.36 L can, the alkyd-based formulation provides a hard, durable film that combines decorative gloss with protection against wear and mild weathering. The product is intended for application on properly prepared wood and metal substrates, including furniture, doors, radiators and metal fixtures.

Advantages

The alkyd binder offers good adhesion to both wood and metal when surfaces are cleaned and prepared correctly. The glossy finish enhances color depth and makes surfaces easier to clean. Its formulation delivers a tough, abrasion-resistant coating suitable for touch-ups and small renovation jobs. The paint’s consistency is designed for brush or small roller application, enabling controlled coverage and smooth finish on detailed elements.

Suitable for

• Small furniture repairs and refinishing
• Doors, door frames and wooden trim
• Radiators and heating elements (after appropriate surface preparation)
• Metal fixtures, railings and small metal components
• Interior and limited exterior touch-up works

Key specifications

• Type of binder: alkyd
• Finish: glossy
• Color: light green
• Volume: 0.36 L
• Recommended substrates: prepared wood and metal
• Application tools: brush or small roller

How to use

Prepare the surface by removing rust, old loose paint, grease and dust. Sand wood to achieve a smooth, absorbent surface and degrease metal parts; prime porous wood or bare metal where recommended. Stir the paint thoroughly before use to ensure uniform color and consistency. Apply in thin, even coats with a brush or small roller, allowing adequate drying time between coats according to ambient temperature and humidity. Clean tools with an appropriate solvent after use and store the remaining paint with the lid sealed.

Usage recommendations

For best performance, use on clean, dry and properly primed substrates. Test compatibility on a small area if repainting over existing coatings. Avoid applying at very low temperatures or in direct rain; ensure sufficient ventilation when used indoors.