Flue Elbow 87° Jeremias 60/80 mm with Support and Mounting Rail

The Jeremias Flue Elbow 87° for concentric 60/80 mm chimney systems is a purpose-built component for changing the direction of the flue gas path in balanced combustion installations. Supplied with an integrated support and a mounting rail, this elbow provides mechanical fastening and stable support for the concentric pipe run used with residential and commercial boilers and heaters. Constructed to fit standard 60/80 mm concentric configurations, it helps maintain correct alignment and safe exhaust routing where a near-right-angle change of direction is required.

Advantages

The flue elbow combines a near-90° directional change with an integrated support structure and mounting rail, allowing secure attachment and reducing the need for additional brackets. Its design preserves the concentric geometry of the 60/80 mm system, which supports safe, balanced combustion and consistent draft. Supplied ready to install, it streamlines the installation process and helps ensure a durable connection between straight pipe runs.

Suitable for

• Changing flue direction in concentric 60/80 mm balanced combustion chimney systems
• Exhaust connections for residential gas boilers and wall-mounted condensing boilers
• Commercial light-duty heating appliances using 60/80 mm concentric flue
• Situations where integrated mechanical support is needed to stabilize pipe runs

When it may not be suitable

This elbow is intended specifically for concentric 60/80 mm systems and is not compatible with other diameters or non-concentric flue designs. It is designed for directional change and support but does not replace full structural mounting assemblies for heavy or unusually long pipe runs; additional supports may be required depending on the overall installation length and local regulations.

Key specifications

• Angle: 87° directional change
• System type: concentric flue configuration
• Inner/outer diameters: compatible with 60/80 mm concentric pipes
• Includes integrated support and mounting rail for mechanical fastening
• Typical application: balanced combustion exhaust for boilers and heaters

How to use

Position the elbow at the required change-of-direction point within the concentric 60/80 mm flue run, ensuring the inner and outer pipes are correctly aligned. Use the supplied mounting rail to fasten the elbow to the building structure or mounting surface, and engage the integrated support to stabilize the concentric pipe assembly. Verify tight mechanical joints and follow the boiler manufacturer's instructions and local codes for clearances and sealing. After installation, perform a system check for proper draft and gas-tightness before commissioning the appliance.

What to consider before purchase

• Compatibility with your system diameter and concentric configuration (60/80 mm)
• Required clearance distances and local building or gas regulations
• Whether additional supports or brackets are needed for long pipe runs
• Compatibility with the specific boiler or heater manufacturer's flue requirements

Usage recommendations

Install only in concentric 60/80 mm systems and follow manufacturer and local regulatory guidance for flue routing, mechanical fastening, and safety checks. Combine the elbow with appropriate seals and periodic inspection to maintain performance and safety of the balanced combustion exhaust system.