Flue Elbow Jeremias Kolano 87 80mm 130-PP22080, 87° 80 mm

Jeremias Kolano 87 flue elbow model 130-PP22080 is an 87° prefabricated bend with an internal diameter of 80 mm, engineered for use in chimney and ventilation systems. The component is intended to change the direction of flue gases or exhaust airflow in installations using 80 mm piping. It is suitable for residential and light-commercial heating, hot-water and ventilation systems where a tight-radius directional change is required.

Advantages

The flue elbow is manufactured to provide accurate geometry for predictable flow behavior and consistent connection to 80 mm ducts. Its prefabricated design reduces on-site cutting and fitting time and ensures stable alignment with adjoining pipework. The 87° angle offers a near-right-angle change of direction while minimizing turbulence compared with sharper turns. The component is compatible with standard 80 mm flue and exhaust systems and is designed for reliable mechanical connection and sealing when installed according to system requirements.

Suitable for

• Changing direction of flue gas in residential chimney systems
• Ventilation duct routing in boiler rooms or utility spaces
• Connecting exhaust outlets of compact heating appliances to 80 mm ducts
• Hot-water system flue routing in light-commercial installations

Key specifications

• Angle: 87° bend
• Internal diameter: 80 mm
• Function: prefabricated flue/elbow connector for directional change
• Compatibility: designed for use with 80 mm flue and exhaust piping
• Application: suitable for chimney, heating appliance exhaust and ventilation systems

How to use

Position the Jeremias Kolano 87 elbow in the planned section of the flue or ventilation run where an 87° directional change is required. Ensure mating pipe ends are clean and free of debris, then insert and align the elbow with adjacent 80 mm sections according to the manufacturer's joining method for the system (e.g., push-fit, clamp or sealed joint). Verify alignment and secure mechanical connections; apply any required sealing materials or gaskets specified for the flue system. After installation, check for correct clearance, support, and compliance with applicable ventilation and chimney regulations.

Ieteicamais lietošanai

Use only with compatible 80 mm system components and follow applicable local building and flue installation codes. Verify that materials and seals are rated for the temperatures and exhaust composition of the connected appliance.