SDS‑MAX concrete drill bit 24 mm JOBIprofi W82410

SDS‑MAX concrete drill bit 24 mm JOBIprofi W82410 is a rotary hammer accessory designed for drilling in concrete, masonry and natural stone. The bit has an SDS‑MAX shank for secure fitting in compatible rotary hammers and a 24 mm diameter suitable for anchor installation, through‑holes and other construction openings. The carbide tip and optimized flute geometry provide reliable cutting performance and improved dust evacuation during drilling.

Advantages

The carbide-tipped head maintains cutting edge durability under heavy use and high impact loads typical for SDS‑MAX rotary hammers. Optimized flute geometry reduces clogging and helps transport debris from the hole, improving drilling speed and stability. The SDS‑MAX shank ensures secure locking in the tool, minimising wobble and transferring impact energy efficiently to the bit tip.

Suitable for

• Drilling anchor holes in reinforced and plain concrete
• Creating through-holes for pipes and conduits
• General masonry and construction drilling tasks
• Working with natural stone and aggregate-based materials

Key specifications

• Diameter: 24 mm
• Shank type: SDS‑MAX
• Tip material: Carbide
• Intended material: Concrete, masonry, natural stone
• Application: Rotary hammer drilling with percussive action

How to use

Select a compatible rotary hammer with an SDS‑MAX chuck and set the tool to hammer drill mode. Mark the drilling point, position the bit square to the surface and start drilling at low speed to establish the hole. Apply steady axial pressure while allowing the hammer action to drive the carbide tip; avoid excessive side load to preserve the tip. Periodically withdraw the bit to clear debris and improve dust evacuation through the flutes. For deeper holes, drill in stages and clear the hole between passes.

Usage recommendations

Wear appropriate personal protective equipment including safety glasses, hearing protection and a dust mask. Use dust extraction or a vacuum attachment where possible to reduce airborne concrete dust. Inspect the bit for wear or damage before use and replace if the carbide tip is chipped or worn to avoid inefficient drilling and potential tool or fastener issues.