Sanding Sponge Juvita Slibesvamp korn 220 — Juvita GAB1069

Juvita Slibesvamp korn 220 — Juvita GAB1069 is a flexible sanding sponge intended for manual sanding and finishing tasks. With a 220 grit abrasive surface bonded to a resilient foam core, this sanding sponge conforms to curved and flat surfaces to deliver consistent, fine abrasion on wood, painted surfaces, lacquers and fillers. It is designed to smooth edges, remove small imperfections and prepare substrates for final coatings or finishing steps in carpentry, DIY and renovation work.

Advantages

The sanding sponge combines a uniform 220 grit abrasive layer with a soft, flexible sponge backing for controlled pressure distribution and reduced risk of flat spots. Its pliable shape enables access to contours, corners and profiles that are difficult to treat with rigid sandpaper. Being hand-friendly and reusable, it allows for precise tactile feedback during sanding and can be rinsed when clogged to extend service life.

Suitable for

• Fine sanding of wooden components prior to staining or varnishing
• Smoothing painted and lacquered surfaces between coats
• Feathering filler and putty to achieve uniform joints
• Detail work on moldings, edges and small profiles
• DIY and renovation tasks where controlled, manual abrasion is required

Key specifications

• Abrasive grit: 220 (fine)
• Construction: abrasive surface bonded to foam sponge backing
• Flexibility: conforms to curved and irregular surfaces for even sanding
• Recommended use: manual sanding and finishing of wood, paint, lacquer and filler
• Cleaning: can be rinsed to remove debris and extend usable life

How to use

Hold the sanding sponge with moderate pressure and move it along the workpiece following the grain of the wood or the direction of the surface finish. For edges and contours, use the sponge’s corners and curved surfaces to reach tight areas. Inspect the surface frequently and work progressively; if deeper material removal is required, start with coarser abrasives before finishing with the 220 grit. Rinse the sponge under running water to clear abrasive dust when it becomes clogged and allow it to dry before further use.

Usage recommendations

Use the 220 grit sanding sponge for final smoothing and surface preparation prior to sealing, painting or varnishing. Avoid excessive pressure to prevent over-sanding; for heavy stock removal use coarser abrasives first. Store the sponge in a dry place and rinse after use to prolong its service life.