Socket lamp holder Kanlux HLDR-E27 ceramic E27 screw lamp holder (02160)

The Kanlux HLDR-E27 ceramic E27 screw lamp holder is designed for reliable mounting of standard E27 lamps in residential and light-commercial fixtures. Constructed from heat-resistant ceramic, this lamp holder provides stable electrical contact and improved durability compared with many plastic alternatives. The threaded E27 interface fits conventional screw-base bulbs and is suitable for ceiling, wall or pendant installations and for replacing worn or damaged holders.

Advantages

Ceramic construction increases heat resistance and reduces the risk of deformation at higher operating temperatures. The standard E27 screw interface ensures compatibility with a wide range of incandescent, LED and compact fluorescent lamps. The design focuses on secure electrical connection and long-term mechanical stability, making it appropriate for frequent lamp changes and continuous use.

Suitable for

• Ceiling-mounted fixtures in living rooms, kitchens and corridors
• Wall-mounted luminaires and sconces requiring an E27 socket
• Pendants and hanging fixtures in domestic or low-traffic commercial spaces
• Replacement of damaged or aged E27 lamp holders

Key specifications

• Socket type: E27 threaded screw
• Material: ceramic for improved heat resistance
• Intended lamp types: incandescent, LED, compact fluorescent with E27 base
• Mounting: suitable for ceiling, wall and pendant installations
• Contact design: secure screw-in electrical contact for standard bulbs

How to use

Before installation, disconnect power at the circuit breaker. Mount the lamp holder into the fixture according to the fixture manufacturer’s instructions, securing the holder mechanically and connecting live, neutral and earth conductors as required by local wiring regulations. After wiring, insert an E27 lamp by screwing it into the holder until snug. Restore power and verify correct operation. For replacement, remove the old holder and install the ceramic holder using the same mounting and wiring points where compatible.

Usage recommendations

Use with lamps that match the voltage and wattage limits of the fixture; avoid exceeding the fixture’s rated wattage. Ensure wiring is performed by a qualified person and that all connections are tight and insulated. Allow the ceramic holder to cool before replacing bulbs to prevent burns. Suitable for indoor use and locations protected from direct moisture.