Kisan pipe fitting clamp connector with external thread GZ 20 mm x 3/4" S20.33.21.00

Kisan pipe fitting clamp connector with external thread GZ 20 mm x 3/4" S20.33.21.00 is a mechanical joining component engineered to connect 20 mm plastic or soft metal tubing to a 3/4" external threaded outlet. The fitting combines a clamped sleeve on the tube side with a male threaded spigot, enabling a secure transition from piping to threaded connections used in plumbing, irrigation and hydraulic service lines. Its compact form factor and direct clamp attachment reduce the need for additional adhesives or complex fittings when performing repairs or new installations.

Advantages

The clamp connector provides a straightforward mechanical connection that is quick to install and resistant to axial pull-out when properly tightened. The external thread offers compatibility with standard 3/4" female threaded devices and adapters, simplifying integration with valves, hoses or other threaded components. Because the tube is held by a clamping mechanism rather than relying solely on solvent or welding, the connector is suitable for field repairs and situations where disassembly may be required.

Suitable for

• Joining or terminating 20 mm tubing to threaded 3/4" fittings
• Plumbing repairs and retrofit installations
• Irrigation systems and garden water distribution
• Low- to medium-pressure hydraulic or fluid conveyance

Key specifications

• Tube connection size: 20 mm
• Thread type: external male thread 3/4"
• Connection style: mechanical clamp fastening
• Intended media: water and common non-corrosive fluids
• Application environment: plumbing, irrigation, hydraulic lines

How to use

Prepare the 20 mm tube end by cutting square and removing any burrs. Slide the clamp collar onto the tube, insert the tube fully onto the spigot until it seats, then position the clamp over the junction. Tighten the clamping screw or fastener according to the manufacturer’s torque guidance to ensure a leak-free seal without deforming the tube. Once clamped, the external thread can be engaged with a corresponding 3/4" female fitting; use appropriate sealing tape or thread sealant on the male thread if required for the intended fluid and pressure conditions.

Usage recommendations

Verify material compatibility between the fitting and the fluid; avoid using with aggressive chemicals unless the fitting’s materials are confirmed compatible. During installation, ensure the tube end is fully inserted and the clamp is evenly tightened to prevent leaks and maintain mechanical strength. For pressurized systems, test the assembly at operating pressure and inspect periodically for signs of wear or loosening.