Expansion plug Klimas KW-10/6X60 – anchor fixing plug for masonry, size 6×60 mm

Klimas KW-10/6X60 expansion plug is a mechanical anchor designed for secure fastening in masonry and concrete. Sized 6×60 mm, the anchor plug expands when a matching screw is tightened, creating a reliable hold for fixtures, rails and light structural elements. The design supports installation in drilled holes, making it suitable for both indoor and outdoor mounting where a firm load-bearing anchor is required.

Advantages

The Klimas expansion plug offers straightforward installation and consistent performance in standard masonry and concrete substrates. Its expansion mechanism provides stable load transfer and reduces the risk of loosening over time. The 6×60 mm dimensions balance insertion depth and holding strength for common fixing tasks. Compatibility with standard screws simplifies inventory and selection for installers and DIY users.

Suitable for

• Mounting light brackets and rails on brick or concrete walls
• Fixing fixtures such as towel rails, small shelves and cable clips
• Securing non-structural elements in interior and exterior applications

Key specifications

• Anchor type: mechanical expansion plug
• Nominal size: 6 × 60 mm (diameter × length)
• Suitable base materials: masonry, brick, concrete
• Installation method: drilled hole with screw-driven expansion
• Typical applications: light-duty fixings and non-structural attachments

How to use

Drill a hole in the masonry or concrete with the recommended drill bit matching the plug diameter. Clean the hole of dust and debris for optimal contact. Insert the expansion plug flush with the surface, then drive a compatible screw into the plug. As the screw is tightened, the plug expands inside the hole and forms a secure mechanical anchor. Ensure the screw length and head type are appropriate for the attached fixture and desired clamping effect.

Usage recommendations

Use appropriate drill bit speed and steady pressure to avoid damaging masonry. For load-bearing or safety-critical fixings, follow local building codes and calculate required spacing, embedment depth and screw size according to the applied loads.