Anchor Screw Klimas SM-8X160 / 4.9x165 mm — hammered installation, pack 100 pcs

Klimas SM-8X160 anchor screw (shown also as 4.9x165 mm) is a hammered-installation fastening intended for mechanically fixing components to masonry and concrete. Supplied in a pack of 100 pieces, the anchor screw is designed for rapid installation with a hammer drive method and provides a firm hold in solid substrates. It is suitable for a range of construction and renovation applications where a compact metal anchor with quick setting is needed.

Advantages

The Klimas SM-8X160 anchor screw delivers reliable mechanical fixation through a hammered installation, reducing installation time compared with threaded or adhesive anchors. Its metal construction ensures strength and resistance to shear loads in solid base materials. Supplied in a bulk pack of 100, it supports multiple fixings on a single project and improves on-site efficiency by minimizing packaging changes.

Suitable for

• Fixing metal profiles, brackets and supports to concrete or brick
• Mounting cable trays, conduit clips and electrical boxes
• Installing light to medium-duty façades, rails and shelving systems
• Temporary or permanent installations in renovation and repair works

Key specifications

• Anchor type: hammered installation anchor screw
• Nominal diameter: approximately 4.9 mm
• Length: approximately 160–165 mm (installation length dependent)
• Material: metal fastener suitable for use in masonry and concrete
• Pack size: 100 pieces

How to use

Drill a hole in the masonry or concrete to the recommended diameter and depth for this anchor type, clean the hole of dust and debris, position the anchor screw through the fixture and insert it into the hole. Use a hammer to drive the anchor until the required embedment depth is reached and the fixture is held firmly against the substrate. Tighten any attached nut or cap if applicable to complete the mechanical connection. Follow common installation practices for hammered anchors and check holding capacity after installation.

Usage recommendations

Use in solid concrete or brick substrates for optimal performance; avoid hollow or weak base materials unless a matching insert or sleeve is specified. Verify drill diameter and embedment depth before installation, and wear appropriate personal protective equipment while drilling and driving anchors.