Diamond Cutting Blade KLINGSPOR 250 mm x 1.9 mm x 30/25.4 mm DT600F for Ceramics

KLINGSPOR DT600F is a 250 mm diamond cutting blade with a 1.9 mm cutting thickness and a dual bore (30/25.4 mm) designed specifically for cutting ceramics. The blade uses a continuous diamond edge that delivers precise, clean cuts in ceramic tiles, porcelain and similar brittle materials. It is compatible with angle grinders and tile saws that accept a 250 mm blade and the specified arbor sizes, providing a stable cutting performance for both professional tilers and DIY users.

Advantages

The continuous diamond rim minimizes chipping and produces smooth edge finishes on ceramic tiles, reducing the need for secondary finishing. A 1.9 mm blade thickness balances cutting speed and durability while limiting material waste. The dual bore design (30/25.4 mm) increases compatibility with a wide range of machines without adapters, and the blade construction is optimized for stable rotation and reduced vibration during cutting.

Suitable for

• Cutting ceramic floor and wall tiles
• Trimming porcelain and glazed tiles
• Precision cuts for tile installations and repairs
• Use on compatible angle grinders and tile saws

Key specifications

• Diameter: 250 mm
• Cutting thickness: 1.9 mm
• Arbor/ Bore: dual 30 mm / 25.4 mm
• Edge type: continuous diamond rim
• Application material: ceramics, porcelain, glazed tiles

How to use

Fit the blade on a power tool with compatible arbor size and secure according to the tool manufacturer’s instructions. Ensure the tool is switched off and unplugged while mounting. Use appropriate cutting speeds and steady feed pressure to avoid overheating; allow the blade to do the cutting rather than forcing it. For wet cutting, follow the saw or grinder guidance for coolant or water supply; for dry cutting, ensure adequate dust extraction and take care to reduce dust inhalation.

Usage recommendations

Use personal protective equipment including safety glasses, hearing protection and a dust mask. Match the blade to the material and cutting method (wet or dry) recommended by your cutting equipment. Inspect the blade before each use for damage or excessive wear and replace if any segment or rim is compromised.