Diamond cutting disc KLINGSPOR 230 mm x 1.8 mm x 30 mm (model 331041)

Diamond cutting disc KLINGSPOR 230 mm x 1.8 mm x 30 mm is a solid continuous-rim abrasive wheel engineered for precise, narrow-kerf cutting of hard construction materials. With a 230 mm diameter, 1.8 mm cutting thickness and a 30 mm bore, this disc fits standard angle grinders and compatible circular saws. It is designed to deliver smooth slices through concrete, natural stone, ceramic tiles and masonry while reducing chipping on finished surfaces.

Advantages

The continuous rim design ensures a consistent cutting line and reduced vibration, resulting in controlled cuts and minimal surface damage. A narrow 1.8 mm kerf lowers material waste and decreases cutting resistance for faster progress. The robust diamond bond offers extended life when used on recommended materials and provides uniform wear for predictable performance.

Suitable for

• Cutting concrete slabs and blocks
• Trimming natural stone and granite
• Cutting ceramic and porcelain tiles
• Masonry and brick cutting for renovation works

Key specifications

• Diameter: 230 mm
• Cutting thickness (kerf): 1.8 mm
• Bore (arbor) diameter: 30 mm
• Rim type: continuous (solid) diamond rim
• Typical mounting: angle grinders and compatible circular saws with 30 mm arbor
• Intended materials: concrete, stone, tiles, masonry

How to use

Mount the disc on a compatible tool with a 30 mm arbor following the tool manufacturer’s instructions. Ensure the disc rotation direction matches the arrow on the disc. Securely tighten the flanges and check for runout before operation. Use appropriate cutting speed for the material, apply steady, even feed without excessive pressure, and allow the disc to do the work. For dry cutting, observe tool limits and manufacturer guidance; for wet cutting, ensure proper water supply and avoid thermal overload.

Usage recommendations

Always wear suitable personal protective equipment such as eye, hearing and respiratory protection and cut-resistant gloves. Use guards and follow safe working distances. Replace the disc if damage, excessive wobble or uneven wear is observed. Match disc type to material to optimise life and cut quality.