Diamond Cutting Disc KLINGSPOR 200 mm x 1.6 mm x 30 mm (331046)

Diamond cutting disc KLINGSPOR 200 mm x 1.6 mm x 30 mm is a full-rim blade designed for precision cutting of hard construction and finishing materials. The continuous diamond rim ensures smooth, chip-reduced cuts on concrete, natural stone, ceramics and porcelain tiles. The disc fits saws with a 30 mm arbor and is intended for use on hand-held and bench cutting machines where a thin, accurate cut is required.

Advantages

The continuous diamond rim delivers clean edges and minimizes chipping, particularly on brittle materials like ceramics and porcelain. With a 1.6 mm kerf the disc reduces material loss and allows for fine, accurate cuts. The 200 mm diameter provides a balance between cutting depth and maneuverability, making the disc suitable for both straight and controlled curved cuts in sheet and slab materials. Compatibility with a 30 mm bore ensures secure mounting on a wide range of professional saws.

Suitable for

• Cutting reinforced and non-reinforced concrete
• Cutting natural stone and granite
• Precision cutting of ceramic and porcelain tiles
• Use on hand-held circular saws and bench saws with 30 mm arbor

Key specifications

• Diameter: 200 mm
• Blade thickness (kerf): 1.6 mm
• Bore diameter: 30 mm
• Rim type: continuous (full) diamond rim
• Primary materials: suitable for concrete, stone, ceramics, tiles

How to use

Secure the disc on a saw with a matching 30 mm arbor and ensure the blade is mounted in the correct rotation direction. Use appropriate machine guards and follow the saw manufacturer's instructions. For best results on hard or brittle materials, work at a steady feed rate without excessive force and allow the diamond rim to cut at its intended speed. When cutting tiles or thin porcelain, support the workpiece to reduce vibration and prevent breakage.

Usage recommendations

Always wear appropriate personal protective equipment including safety glasses, hearing protection and respiratory protection when cutting dusty materials. Use water cooling if the saw and disc specifications allow water use to reduce dust and extend blade life. Inspect the disc before each use for cracks or damage and replace it if any defects are found.