Abrasive Sanding Paper Roll KLINGSPOR 5 m x 115 mm grit 40 (model 45431)

KLINGSPOR abrasive sanding paper roll 5 m x 115 mm in grit 40 is a coarse open-coat abrasive designed for heavy stock removal, shaping and preparing surfaces prior to finishing. The long roll format lets you cut custom lengths for manual sanding tools and sanding holders, supporting continuous work in workshop and renovation environments. Coarse grit 40 is suitable where aggressive material removal is required on wood, metal and old paint layers.

Advantages

The KLINGSPOR roll combines durable abrasive grains with a backing that tolerates repeated cutting to length and high-pressure manual use. Its coarse grit provides rapid cutting action and reduces clogging on soft woods and painted surfaces. The roll format reduces waste by allowing precise length selection and is compatible with standard sanding holders and manual sanding blocks for versatile application.

Suitable for

• Rapid removal of old paint, varnish and coatings
• Shaping and leveling rough wood and timber surfaces
• Deburring and rough sanding of metal before finer finishing
• Preparing surfaces for subsequent sanding stages or primer application

Key specifications

• Abrasive type: coarse grit 40
• Format: roll, 5 m length
• Width: 115 mm
• Backing: flexible paper suitable for hand cutting and holders
• Application: manual sanding, compatible with sanding holders and blocks

How to use

Measure and cut a length of sanding paper from the roll to fit your sanding holder or manual block. Use coarse back-and-forth strokes with consistent pressure, keeping the paper flat against the surface to avoid gouging. For metal work or painted surfaces, check frequently for clogging and brush away debris. When initial shaping or paint removal is complete, transition to finer grits for smoothing and finishing.

Usage recommendations

Wear appropriate personal protective equipment such as dust mask and eye protection when sanding. Test on a small area if uncertain about substrate reaction. Replace the sanding strip when performance decreases or the abrasive becomes clogged to maintain efficient material removal.