Polishing Sponge KLINGSPOR 120×98×10 mm grit 220 for wood/putty/paint/plastics (45769A)

The KLINGSPOR polishing sponge 120×98×10 mm with grit 220 is designed for fine sanding and finishing on wood, putty, paint and plastics. Its open-cell foam backing provides flexibility to follow contours and detailed shapes, allowing controlled hand sanding and even pressure distribution. The medium-fine 220 abrasive is suitable for smoothing surfaces, removing minor imperfections and preparing substrates for final coats or polishing.

Advantages

The flexible foam support conforms to curved and irregular surfaces, reducing the risk of creating grooves or deep scratches while maintaining consistent abrasive contact. The 220 grit grain size balances material removal and surface refinement, enabling effective smoothing of filler joints and feathering of painted edges. Lightweight and easy to handle, the sponge simplifies hand sanding in tight spots and on shaped profiles.

Suitable for

• Sanding and finishing wood surfaces
• Smoothing putty and filler joints before painting
• Feathering and preparing painted edges
• Light sanding on plastic components and trim
• Detail work on curved or irregular surfaces

Key specifications

• Dimensions: 120 × 98 × 10 mm
• Abrasive grit: 220 (medium-fine)
• Backing: flexible open-cell foam
• Suitable materials: wood, putty/filler, paint, plastics
• Designed for hand sanding and contour work

How to use

Select the sponge with 220 grit for final smoothing or intermediate sanding steps. Hold the sponge with light, even pressure and move it along the grain on wood or along the surface profile on fillers and paint. For painted surfaces, use feathering motions at edges to blend transitions. Replace the sponge when the abrasive is clogged or worn to avoid uneven sanding. Clean the surface of dust before applying subsequent coats.

Usage recommendations

Use with gentle, consistent strokes and avoid excessive pressure to prevent over-sanding. For best results, pair the 220 grit polishing sponge with coarser abrasives for initial shaping and finer abrasives for final finishing. Keep the sponge clean from heavy debris and change as needed to maintain surface quality.