Abrasive Disc KLINGSPOR P100 self-adhesive 125 mm PS 18 EK (MPN P8 L S5 100)

Self-adhesive abrasive disc KLINGSPOR P100, 125 mm diameter, model PS 18 EK is designed for medium-fine sanding and finishing on wood, paint, primer and soft metals when used with a compatible backing pad. The P100 grit provides controlled material removal and surface blending for preparation and intermediate sanding steps. The self-adhesive backing enables quick attachment and replacement on rotary or random orbital sanders, reducing downtime during sanding tasks.

Advantages

The KLINGSPOR P100 abrasive disc offers consistent grit distribution for even sanding performance and predictable stock removal. Its self-adhesive system makes disc changes fast and secure while maintaining concentric mounting on standard 125 mm backing pads. The abrasive composition is suitable for use on a variety of substrates including bare and painted wood, primers and soft metals, delivering a balance between cutting ability and surface finish quality.

Suitable for

• Medium-fine sanding of wooden surfaces prior to finishing
• Blending and feathering paint and primer edges
• Light deburring and finishing of soft metals
• General surface preparation with rotary or random orbital sanders

Key specifications

• Diameter: 125 mm
• Abrasion grade: P100 (medium-fine)
• Attachment: self-adhesive backing for quick mounting
• Recommended tool: rotary or random orbital sander with compatible 125 mm backing pad
• Typical applications: wood, paint, primer, soft metals

How to use

Ensure the backing pad on the sander is clean and free of dust or debris before applying the disc. Peel the protective liner from the self-adhesive surface, align the disc centrally on the 125 mm backing pad and press firmly from the center outward to secure adhesion and minimise air pockets. Operate the sander at manufacturer-recommended speeds, apply light even pressure and move the tool progressively over the workpiece to avoid gouging. Replace the disc when abrasive performance decreases or the surface finish is no longer acceptable.

Usage recommendations

For best results, use the P100 disc in a sequence with coarser and finer grits as required by the workpiece: start with a coarser grit for heavy stock removal, follow with P100 for blending, and finish with a finer grit for a smooth surface. Wear appropriate eye, hearing and respiratory protection and follow tool manufacturer safety guidelines.