Grinding disc Kodak K.DISC 225 PS33CK — 225 mm diameter, 60 grit

Kodak K.DISC 225 PS33CK — 225 mm diameter, 60 grit is a grinding disc designed for medium-coarse material removal and surface preparation on metal and similar substrates. Intended for use on angle grinders and comparable rotating tools, this 225 mm disc offers a balance between stock removal rate and control, suitable for workshop and maintenance environments where efficient grinding, deburring and surface cleaning are required.

Advantages

The disc combines 60-grit abrasive for effective material removal with a resilient backing that maintains stability during rotation. Its 225 mm diameter provides extended reach and contact area compared with smaller discs, allowing faster coverage of larger surfaces. The product is suitable for repeated use in routine metalworking tasks and is compatible with standard angle grinder mounting systems.

Suitable for

• Deburring sharp edges on steel and iron components
• Dressing weld seams and smoothing join lines
• Removing rust, scale and old paint from metal surfaces
• General grinding and surface preparation in workshops and maintenance

Key specifications

• Disc diameter: 225 mm
• Abrasive grit: 60 (medium-coarse)
• Intended tool: angle grinders and comparable rotating tools
• Primary materials: metal surfaces (steel, iron) and similar substrates

How to use

Install the grinding disc on a compatible angle grinder following the tool manufacturer's mounting instructions and safety requirements. Verify that the disc is suitable for the grinder's speed rating and secure the disc before operation. Use steady, even pressure and move the grinder across the workpiece to achieve uniform material removal; avoid excessive pressure that can overheat the disc or workpiece. Wear appropriate personal protective equipment including eye protection, gloves and hearing protection while grinding.

Usage recommendations

For best results, start grinding with light passes to establish a flat, even surface and then increase pressure as needed. Keep the disc clean of heavy debris and replace it when the abrasive becomes worn or the disc shows signs of damage. Ensure adequate ventilation when removing paint or rust to minimize exposure to dust and fumes.