Screw-in drywall anchor with screw Koelner/Rawlplug K-BK3-DRA01+/35 — set 35 pieces

Set of 35 screw-in drywall anchors with matching screws from Koelner/Rawlplug, designed for fastening into gypsum plasterboard (drywall). These self-drilling anchors allow direct installation in G-K boards without pre-drilling, providing stable fixing points for light to medium loads encountered in interior fitting and renovation tasks. The kit contains multiple anchors and screws sized to work together, simplifying mounting of fixtures on plasterboard surfaces.

Advantages

Self-drilling design enables quick installation in standard gypsum boards without the need for pilot holes, reducing installation time. Delivered with matching screws to ensure compatibility and reliable engagement between anchor and screw. Engineered for light to medium load distribution across the drywall, offering consistent performance for common interior fixtures. The plastic/metal composite construction provides a balance of grip and ease of insertion while minimizing damage to the board.

Suitable for

• Mounting small shelves and brackets on plasterboard walls
• Fixing cabinets, mirrors and bathroom fittings to drywall
• Hanging pictures, towel rails and light fixtures
• Interior renovation and finishing works where secure plasterboard fixings are required

Key specifications

• Quantity: set of 35 pieces (anchors with matching screws)
• Type: screw-in, self-drilling drywall anchors
• Intended substrate: gypsum plasterboard (drywall, G-K boards)
• Load class: suitable for light to medium loads on plasterboard
• Material: composite plastic and metal components for secure hold
• Installation method: screw-in with a screwdriver or drill with appropriate bit

How to use

Position the anchor at the chosen point on the drywall and insert the tip against the surface. Drive the anchor into the board by turning with a screwdriver or a drill at low speed until the flange sits flush with the wall. Insert the supplied screw into the anchor and tighten to secure the fixture; avoid overtightening which can strip the anchor or damage the drywall. For heavier items, use multiple anchors and follow the fixture manufacturer's guidance for weight distribution.

Usage recommendations

Use only in gypsum plasterboard of suitable thickness and condition; avoid installation near board edges or joints unless additional reinforcement is provided. For heavy or load-bearing installations, choose anchors and fixing methods rated for higher loads or mount into structural backing. Test a sample fixing when in doubt regarding board condition or load demands.