Screw Feeder Koelner/Rawlplug R-PDS-AF1 for 25–57 mm screws, 1 pc

The Screw Feeder Koelner/Rawlplug R-PDS-AF1 for 25–57 mm screws is an automatic attachment developed to speed up repetitive fastening operations. Supplied as a single unit, the feeder is intended to work with power drivers to deliver consistent screw placement for construction, woodworking, and installation tasks. It supports a range of screw lengths from 25 mm to 57 mm and is designed to reduce the need for manual screw handling and positioning during series assembly or onsite fitting.

Advantages

The feeder provides steady screw delivery to the driver, reducing cycle time and improving alignment consistency when driving screws into timber, drywall, or composite materials. Its compatibility with standard power drivers helps maintain installation speed across long runs of repetitive work. As a single-piece supply, the product is compact to carry and attach, intended to simplify logistics on site and minimize interruptions caused by manual screw feeding.

Suitable for

• Rapid repetitive fastening in carpentry and joinery
• Drywall and interior partition installation
• Onsite assembly and decking where many screws of 25–57 mm are used
• Production lines or maintenance tasks requiring consistent screw placement

When it may not be suitable

This screw feeder is intended specifically for screws with lengths between 25 mm and 57 mm; it will not work reliably with shorter or longer fasteners. It is designed to be used with compatible power drivers and is not a standalone electric screwdriving tool. For tasks requiring specialist fasteners (e.g., self-drilling metal screws with integrated washers or very large-diameter structural screws), a different feeding solution or manual fastening may be necessary.

Key specifications

• Compatible screw length range: 25–57 mm
• Quantity supplied: 1 unit
• Designed for use with handheld power drivers
• Application: repetitive screw feeding for timber, drywall, and general installation

How to use

Attach the screw feeder to a compatible power driver following the driver manufacturer’s recommended mounting procedure. Load a strip or column of appropriate-length screws into the feeder channel, position the driver at the intended fastening point, and operate the driver trigger to advance and drive each screw. For consistent results, ensure screw heads and shanks match the feeder’s guide dimensions and keep the feeder aligned perpendicular to the work surface while driving.

What to consider before purchase

• Verify that your power driver accepts third-party feeders and that the mounting interface matches the feeder attachment.
• Confirm that the screws you plan to use fall within the 25–57 mm length range and are compatible in head type and diameter.
• Assess whether the feeder’s material compatibility (timber, drywall, composites) fits your primary application.

Usage recommendations

For best performance, use the feeder with screws of consistent length and head type, maintain the feeder channel free of debris, and periodically check alignment with the driver bit. When switching screw sizes, clear and reload the feeder to avoid jams. Follow personal protective equipment guidelines and the power driver manufacturer’s safety instructions during operation.