Grinding Wheel Korund Tarcza do kamienia odsa. 125x3.2x22 — 125 mm abrasive cutting disc 3.2 mm thickness 22 mm bore

Korund Tarcza do kamienia odsa. 125x3.2x22 is a 125 mm abrasive cutting and grinding disc designed specifically for working with stone and other mineral materials. With a nominal diameter of 125 mm, a cutting thickness of 3.2 mm and a 22 mm centre bore, this disc fits common handheld angle grinders and is intended for manual cutting, shaping, trimming edges and preparing surfaces on masonry, tile and concrete.

Advantages

The disc construction provides a balance between cutting speed and durability for stone applications. Its 3.2 mm thickness ensures relatively precise cuts while maintaining sufficient material for long service life under normal working conditions. The 22 mm centre bore is compatible with standard grinder flanges, offering stable mounting and reduced vibration during operation.

Suitable for

• Cutting and trimming natural stone and engineered stone
• Shaping and profiling tiles and ceramic materials
• Edge finishing of concrete and masonry blocks
• Surface preparation and removal of small amounts of material on mineral substrates

Key specifications

• Diameter: 125 mm
• Cutting thickness: 3.2 mm
• Centre bore: 22 mm
• Material type: abrasive disc for stone and mineral materials
• Tool compatibility: handheld angle grinders with suitable flange adapters

How to use

Mount the Korund 125x3.2x22 disc on a compatible angle grinder according to the grinder manufacturer’s instructions, ensuring the disc is securely clamped and the wheel guard is in place. Use appropriate personal protective equipment including eye protection, gloves and respiratory protection when cutting or grinding mineral materials. Start the grinder and make controlled passes through the workpiece, allowing the disc to cut without excessive force. For best results, maintain steady feed, avoid overheating the disc and let the tool do the work to preserve disc life and cutting quality.

Usage recommendations

Use water suppression or dust extraction where possible to reduce airborne dust when cutting tile, concrete or stone. Inspect the disc before each use for cracks, damage or excessive wear and replace if any defects are found. Follow speed ratings and mounting instructions of both the disc and the angle grinder to ensure safe operation.