Drill bit KREATOR KRT010121 HSS 10 x 133 mm

HSS drill bit KREATOR KRT010121 with a 10 mm cutting diameter and 133 mm overall length is intended for drilling metal and common workshop materials. The bit is made of high-speed steel (HSS) and has a straight shank suitable for use in handheld drills and drill presses. Its geometry provides accurate hole placement and reliable cutting performance for general-purpose tasks in construction, maintenance and repair.

Advantages

The HSS material offers good hardness and heat resistance for drilling into various ferrous and non-ferrous metals as well as plastics and wood; the straight shank ensures secure clamping in standard chucks; the 10 mm diameter and extended length allow access to deeper holes while maintaining rigidity; the flutes evacuate chips efficiently to reduce clogging and overheating. Overall, the bit combines dimensional accuracy with a durable cutting edge for repetitive workshop use.

Suitable for

• Drilling holes in steel, cast iron and non-ferrous metals
• General workshop and maintenance drilling
• Handheld drill and bench drill applications
• Repair, installation and construction tasks requiring 10 mm holes

Key specifications

• Material: High-speed steel (HSS)
• Cutting diameter: 10 mm
• Overall length: 133 mm
• Shank type: Straight shank for standard chucks
• Flute type: Spiral flutes for chip evacuation
• Intended materials: Ferrous and non-ferrous metals, plastics, wood

How to use

Secure the drill bit in the chuck so that the shank is fully seated and tightened. Select an appropriate drill speed and, when drilling metal, use cutting fluid or coolant to reduce heat and extend tool life. Begin drilling with a light backing pressure to establish the pilot point, then apply steady pressure while allowing the bit to cut. Clear chips regularly by retracting the bit when necessary and avoid excessive feed rates that may cause bending or breakage.

Usage recommendations

For best results when drilling steel, use a moderate spindle speed and a suitable cutting lubricant. For softer materials such as aluminum or plastics, increase speed and reduce feed to prevent clogging; when drilling deep holes, retract occasionally to remove chips and maintain cutting efficiency.