Drill Bit Set KREATOR Stone Set 3–10 mm, 8 pieces

KREATOR Stone Set 3–10 mm is an 8-piece collection of drill bits designed for drilling into stone and masonry. The set covers hole sizes from 3 mm to 10 mm and is intended for use with compatible rotary and hammer drills. These bits are suitable for tasks such as installing anchors, fixing fixtures, and other light to medium-duty masonry drilling operations commonly encountered in DIY, renovation and professional settings.

Advantages

The set provides a range of diameters in one compact kit, reducing the need to buy individual bits for routine jobs. Bits are manufactured for drilling in stone and common masonry materials, offering consistent hole sizes and reliable centring when used with appropriate drill settings. The assortment supports both rotary and percussion drilling modes where applicable, giving flexibility for different substrates and power tools. The compact packaging helps keep bits organised and readily accessible on-site or in a workshop.

Suitable for

• Drilling holes for wall anchors and plugs in stone or concrete block
• Installing fixtures such as shelves, brackets, and towel rails
• Light renovation tasks and mounting hardware in masonry walls
• General DIY projects that require masonry drilling from 3 mm to 10 mm

Key specifications

• Number of pieces: 8
• Diameter range: 3 mm, 4 mm, 5 mm, 6 mm, 7 mm, 8 mm, 9 mm, 10 mm
• Intended material: stone and masonry
• Compatible tool types: rotary drills and hammer/impact drills
• Pack type: compact set for storage and transport

How to use

Select the drill bit diameter that matches the anchor or fixture you plan to install. Secure the chosen bit in the drill chuck and set the drill to the appropriate mode — rotary or hammer/percussion as required by the substrate. Mark the drilling point and start at low speed to position the bit accurately, then increase speed and apply steady pressure. Withdraw the bit periodically to clear dust from the hole and avoid overheating. After drilling the full depth, clean out the hole before inserting anchors or fixings.

Usage recommendations

Use appropriate personal protective equipment such as safety glasses, gloves and a dust mask when drilling masonry. Select a drill mode suitable for the material and avoid excessive pressure that can damage the bit or workpiece. For larger anchors or deep holes, consider incremental drilling with progressively larger diameters and ensure the drill and bit are compatible with the required torque and impact settings.