Circular saw blade KREATOR KRT020409 160 x 30 x 2 mm, 48 teeth

KREATOR KRT020409 is a 160 x 30 x 2 mm circular saw blade with 48 teeth designed for cutting wood. The blade diameter, 30 mm arbor hole and 2 mm plate thickness are matched to common table saws and mitre saws, offering a balance between cutting speed and surface finish. With 48 teeth the blade is intended to deliver precise crosscuts and rip cuts in a range of softwood and hardwood materials while reducing tear-out and producing a smooth edge.

Advantages

The high tooth count provides a finer finish compared with coarser blades while maintaining reasonable cutting speed. The 2 mm plate thickness gives stability during cuts to minimize wobble and vibration. A 30 mm arbor hole ensures compatibility with many consumer and professional saws. The blade geometry and tooth arrangement are optimized for general woodworking tasks, helping to extend tool life and maintain consistent cutting performance.

Suitable for

• Crosscutting boards, panels and mouldings
• Ripping lumber and dimensional timber with controlled finish
• Use on table saws and mitre saws with a 30 mm arbor
• Cutting various softwoods and hardwoods, laminated boards and veneered panels

Key specifications

• Diameter: 160 mm
• Arbor hole: 30 mm
• Plate thickness: 2 mm
• Number of teeth: 48
• Material application: wood cutting

How to use

Install the blade on a compatible saw with a 30 mm arbor following the machine manufacturer’s instructions and ensure the blade is mounted in the correct rotation direction. Tighten the flange and arbor nut to the specified torque and check blade run-out before cutting. Adjust saw speed and feed rate according to the wood type and thickness; use slower feed for harder woods and thicker panels to preserve tooth life and achieve a clean cut. Always use appropriate push sticks, guards and fences for safe and accurate cutting.

Usage recommendations

For best results, sharpen or replace the blade when cutting quality decreases, and use a suitable anti-kickback device and personal protective equipment. When cutting veneered or laminated panels, use a sacrificial backing board or score the cut line to reduce surface chipping.