Circular Saw Blade KREATOR 210 x 30 x 2.2 mm, 60 Teeth (KRT020422)

Circular saw blade KREATOR 210 x 30 x 2.2 mm, 60 Teeth is a precision cutting accessory designed for wood and wood-based materials. With a 210 mm diameter and 30 mm bore, the blade features a 2.2 mm kerf and a 60-tooth fine-tooth geometry that supports smoother crosscuts and clean rip cuts. The blade is intended for use on table saws, mitre saws and circular saws that accept a 30 mm arbor, and is suitable for carpentry, joinery and finish work where surface quality and dimensional accuracy matter.

Advantages

The 60-tooth configuration reduces tear-out and delivers a finer surface finish compared with coarse-tooth blades, allowing less sanding after cutting. The 2.2 mm kerf balances material removal and cutting stability, providing efficient cutting performance while maintaining blade rigidity. A 30 mm bore ensures compatibility with common arbor standards used in many workshop machines. The blade’s profile and tooth count are optimized for versatility across crosscutting and ripping tasks in soft and hard wood, plywood and other wood-based panels.

Suitable for

• Accurate crosscuts in solid wood and laminated boards
• Finer rip cuts where surface finish is important
• Table saws, mitre saws and handheld circular saws with a 30 mm arbor
• Carpentry, joinery, cabinet making and finishing tasks

Key specifications

• Blade diameter: 210 mm
• Arbor / bore diameter: 30 mm
• Kerf / blade thickness: 2.2 mm
• Tooth count: 60 (fine-tooth geometry)
• Primary material suitability: solid wood, plywood, MDF and other wood-based panels
• Typical applications: crosscutting and fine rip cutting

How to use

Install the blade on a compatible saw with a 30 mm arbor, ensuring the machine is disconnected from its power source before fitting. Verify the blade is mounted in the correct rotation direction and that flange and nut are secured to the manufacturer’s torque recommendation. Select the appropriate saw speed and feed rate for the material; slower feed yields smoother finishes with a 60-tooth blade. Use proper clamping or a fence for repeatable cuts and allow the blade to reach full speed before engaging the workpiece. Inspect the blade for damage or buildup and clean periodically to maintain cutting performance.

Usage recommendations

For best results, use this 60-tooth blade for finish work and precision cuts in wood and wood-based panels. Match blade speed and feed to the material and ensure the saw’s guard and safety devices are in place. Replace the blade when teeth become worn or when cutting performance degrades to avoid burning or poor cut quality.