Diamond Cutting Disc 125 x 22.2 mm (Wet) — KREATOR KRT081102

Diamond cutting disc 125 x 22.2 mm (Wet) — KREATOR KRT081102 is a wet-cutting blade designed for use with angle grinders and tile saws that accept a 22.2 mm bore. The disc is engineered for cutting tile, ceramic, porcelain and natural stone when used with water cooling to reduce dust and control temperature at the cutting edge. Its 125 mm diameter provides a balance between cutting depth and manoeuvrability for both professional and DIY tasks.

Advantages

The wet diamond rim and bonded matrix allow for fast, precise cuts with a reduced risk of overheating. Water cooling reduces dust generation and extends blade life, while the 22.2 mm centre hole ensures compatibility with a wide range of angle grinders and tile saws. The disc construction aims to deliver consistent cutting performance across abrasive and dense materials common in tiling and stonework.

Suitable for

• Cutting ceramic and porcelain tiles
• Trimming natural stone and marble tiles
• Wet cutting applications to minimize dust
• On-site tile installation and repair work

Key specifications

• Diameter: 125 mm
• Bore size: 22.2 mm
• Intended use: Wet cutting
• Material compatibility: Tile, ceramic, porcelain, natural stone

How to use

Mount the disc on a compatible angle grinder or tile saw with a 22.2 mm bore, following the tool manufacturer's mounting instructions. Ensure the workpiece is secured and that a continuous water supply reaches the cutting area to cool the blade and suppress dust. Operate at the recommended speed for the tool and do not apply excessive force; allow the blade to progress through the material at a steady, controlled pace. Inspect the disc regularly for wear or damage and replace when the rim becomes excessively worn or compromised.

Usage recommendations

Use appropriate personal protective equipment including eye protection, hearing protection and cut-resistant gloves. Maintain water flow during cutting to reduce dust and prevent overheating. Do not use the disc for dry cutting or on materials outside the listed compatibility to avoid reduced performance and safety risks.