Sanding Discs 125 mm G80, fabric-backed, KREATOR KRT230505

Sanding Discs 125 mm G80, fabric-backed, KREATOR KRT230505 are 125 mm abrasive discs with G80 (P80) grit designed for medium-coarse material removal. The discs feature a fabric backing that increases tear resistance and improves conformity to curved or uneven surfaces. They are suitable for orbital and rotary sanders with 125 mm disc compatibility and intended for tasks such as paint removal, surface preparation, and smoothing of wood and metal.

Advantages

The fabric-backed construction provides enhanced durability and better resistance to tearing compared with paper-backed abrasives, extending disc life under higher pressure and on irregular surfaces. G80 (P80) abrasive grit offers a balance between material removal rate and surface finish, enabling efficient stripping of old paint, rust, and rough wood without producing an overly aggressive scratch pattern. The 125 mm diameter is a common size for handheld orbital and rotary sanders, allowing easy replacement and compatibility with standard hook-and-loop or adhesive fastening systems.

Suitable for

• Removing old paint and varnish from wooden furniture and doors
• Stripping rust and preparing metal surfaces for primer
• Sanding rough or planed wood to even out surfaces
• Preparing surfaces before filling, priming or repainting
• General renovation and refurbishment tasks requiring medium-coarse abrasion

Key specifications

• Disc diameter: 125 mm
• Abrasion grade: G80 (P80) — medium-coarse grit
• Backing material: fabric (cloth) for improved durability and flexibility
• Compatibility: for orbital and rotary sanders accepting 125 mm discs
• Typical fastening: compatible with common hook-and-loop or adhesive systems (depends on sander model)

How to use

Attach the sanding disc to a compatible 125 mm orbital or rotary sander following the sander manufacturer's instructions for fastening. Begin sanding at low to medium speed, applying even pressure and moving the tool in consistent strokes to avoid creating gouges. For painted or rusted surfaces, start with steady passes to remove the bulk of the coating, then refine the surface as needed. Replace the disc when cutting efficiency decreases or when the backing shows significant wear.

Usage recommendations

Use appropriate personal protective equipment such as dust masks, eye protection and hearing protection. Match the G80 grit choice to the task: select G80 for medium-coarse removal and switch to finer grits for finishing. Avoid excessive pressure to prolong disc life and maintain consistent surface results.