Sanding discs KREATOR KRT250502 125 mm G36, pack of 5 for angle grinder

Set of five 125 mm sanding discs KREATOR KRT250502 with G36 grit designed for use with angle grinders. These discs are intended for coarse material removal, rapid shaping and initial surface preparation on metal, wood and similar substrates. The 125 mm diameter fits standard backing pads for angle grinders and provides an abrasive surface that balances cutting speed with service life for workshop and construction tasks.

Advantages

The coarse G36 abrasive delivers fast stock removal while maintaining consistent grit structure throughout the disc. A standard 125 mm size ensures compatibility with commonly used backing pads and accessories for angle grinders. The pack of five provides multiple replacements for continuous work without interruption. The discs are manufactured to withstand rotational speeds typical for handheld angle grinders and offer predictable performance across different materials.

Suitable for

• Removing rust and scale from metal surfaces
• Shaping rough wood and removing old coatings
• Preparing welds and smoothing edges
• Coarse surface preparation prior to finer sanding or priming

Key specifications

• Diameter: 125 mm
• Abrasive grit: G36 (coarse)
• Quantity in pack: 5 discs
• Designed for use with angle grinders and 125 mm backing pads
• Suitable materials: metal, wood and similar substrates

How to use

Mount the sanding disc securely on a compatible 125 mm backing pad following the angle grinder manufacturer's mounting instructions. Inspect the disc before use and discard any disc that is torn or damaged. Start the grinder at a controlled speed and apply steady, even pressure; allow the abrasive to do the cutting rather than forcing the tool. Move the disc across the surface with smooth passes to avoid gouging and to achieve an even result. Replace the disc when the abrasive performance diminishes.

Usage recommendations

Wear appropriate personal protective equipment including eye and hearing protection, gloves and a dust mask. Use with angle grinders rated for the disc's operating speed, and secure the workpiece before sanding. For finer finishes, follow coarse removal with progressively finer grits.