Sanding Paper Discs KREATOR KRT250504 125 mm G60, pack of 5

Sanding paper discs KREATOR KRT250504 are 125 mm diameter abrasive discs with G60 grit, supplied as a pack of five. They are made for use with 125 mm angle grinders and sanding backing pads that accept disc attachments, providing medium to coarse abrasive action for stock removal and surface preparation on metal, wood and painted surfaces. The discs are intended for tasks such as grinding, blending, and rough sanding where faster material removal and consistent abrasive performance are required.

Advantages

These sanding discs offer a balance between aggressive cutting and manageable control thanks to the G60 abrasive grade. The 125 mm format is compatible with common angle grinders and backing pads, and the five-disc pack ensures multiple jobs or stages of a project without frequent replenishment. The discs are suitable for both metal and woodworking applications as well as paint surface preparation, delivering reliable material removal and a predictable abrasive life under normal operating conditions.

Suitable for

• Removing rust, mill scale and old coatings from metal
• Shaping and leveling wooden surfaces before finer sanding
• Preparing painted surfaces for repainting or refinishing
• Grinding welds and smoothing joint areas
• Bulk stock removal prior to finer finishing steps

Key specifications

• Disc diameter: 125 mm
• Abrasion grade: G60 (medium-coarse)
• Quantity per pack: 5 discs
• Compatible tool: 125 mm angle grinders and backing pads that accept disc attachments
• Primary materials: metal, wood, painted surfaces

How to use

Mount the sanding disc securely on a compatible 125 mm backing pad or directly on an angle grinder if the tool accepts disc attachments. Match the disc speed rating to the grinder’s maximum RPM and avoid exceeding the disc’s rated speed. Start with light contact, increase pressure as needed for material removal, and keep the tool moving to prevent gouging or uneven sanding. For metal work, use consistent passes to remove rust or coatings; for wood, progress toward finer grits after the initial shaping step.

Usage recommendations

Wear appropriate personal protective equipment including safety glasses, dust mask and hearing protection. Use in well-ventilated areas or with dust extraction to reduce airborne particles. Replace discs that show significant wear, tearing, or loss of abrasive surface to maintain effective and safe operation.