Multi cutting blade KREATOR KRT990010 34mm for wood is a replacement oscillating tool blade made for cutting timber, plywood and wooden trim. Designed to fit multi-tools that accept 34 mm fittings, this blade enables plunge, flush and detail cuts where short, controlled cuts are required. The blade geometry and tooth configuration focus on woodworking tasks commonly encountered during renovation, carpentry and do-it-yourself projects.
Advantages
The blade offers a compact 34 mm width for access to tight spaces and accurate trimming near edges. Its cutting edge is optimized for clean short cuts in wood and laminated panels, reducing the need for extensive finishing. Compatibility with standard 34 mm tool fittings ensures quick replacement and secure mounting during use. The construction balances cutting efficiency with control, making it suitable for repeated short-duration cuts.
Suitable for
- Plunge cuts in timber and plywood
- Flush cutting of wooden trim and moldings
- Detail trimming and shaping in carpentry and renovation
- DIY woodworking tasks in confined or hard-to-reach areas
Key specifications
- Blade width: 34 mm
- Intended material: wood, plywood, laminated wood panels
- Cut type: plunge, flush and detail cuts
- Tool interface: fits multi-tools accepting 34 mm blades
- Typical application: renovation, carpentry, DIY trimming
How to use
Install the blade on a compatible oscillating multi-tool following the tool manufacturer's blade attachment procedure and secure it before operation. Mark the cut line on the workpiece, align the 34 mm blade with the intended cut, and start the tool at a moderate oscillation speed. Use light, controlled feed pressure and let the blade do the cutting to avoid overloading. For flush cuts, position the blade so the cutting edge meets the trim surface carefully. Clear sawdust regularly to maintain visibility and cooling.
Usage recommendations
Wear appropriate personal protective equipment such as eye protection and dust mask. For best results on laminated or veneered panels, make a shallow initial pass to reduce chipping, and consider backing the cut area to support the material. Replace the blade when cutting performance decreases or when the edge shows visible wear.
