Nail Puller Set KREATOR KRTH24001 – 3 pcs, 100 mm, tips 0.8/1.6/2.4 mm

KREATOR Nail Puller Set KRTH24001 contains three 100 mm nail pullers with tip widths of 0.8 mm, 1.6 mm and 2.4 mm. These compact tools are designed for precise removal of small nails, staples and fasteners in woodworking, repair and hobby tasks. The short length provides control in confined or shallow areas while the different tip sizes let you match the tool to the diameter and head profile of the fastener for safer extraction with minimal surface damage.

Advantages

The set offers three tip options in a single kit, enabling accurate work on a range of small fasteners without the need for improvised tools. At 100 mm length each puller gives improved maneuverability in tight spaces and better tactile feedback during extraction. Hardened tips resist bending during repeated use, and the slim profiles reduce the risk of widening holes or splitting thin materials.

Suitable for

• Removing small nails and brads in trim and molding work
• Extracting staples from upholstery and packaging
• Delicate woodworking repairs in confined spaces
• Hobby and model-making tasks requiring fine fastener removal

Key specifications

• Set composition: 3 nail pullers
• Overall length: 100 mm each
• Tip widths: 0.8 mm, 1.6 mm, 2.4 mm
• Material: hardened steel tips with finished shafts (metal)
• Intended use: manual nail, staple and small fastener extraction

How to use

Select the puller tip that best fits the fastener head and slide the tip under the head or staple crown. Apply steady, controlled leverage while supporting the workpiece if possible to avoid tearing or splintering. For stubborn fasteners, work the tool gradually from alternate sides and reposition the tip closer to the surface as extraction progresses. Use gentle taps with a small mallet on the shaft if extra initial penetration is required, taking care not to damage the surrounding material.

Usage recommendations

For best results use the 0.8 mm tip for very fine pins and model work, the 1.6 mm tip for general trim nails and small brads, and the 2.4 mm tip for larger brads and some staples. Protect finished surfaces by placing a thin shim or cloth between the tool and the workpiece when levering near visible finishes. Store the set together to keep tips aligned and to prevent tip damage.