Bar Clamp KREATOR KRTH40302 300 x 500 mm, 60 kg clamping force

KREATOR KRTH40302 is a bar clamp with a 300 x 500 mm capacity and a rated clamping force of 60 kg. It is engineered to hold workpieces securely during gluing, assembly and light woodworking tasks. The clamp combines a rigid steel bar with a sliding jaw and quick-release mechanism to allow fast positioning and consistent pressure across the clamped surface. Its size and force level make it appropriate for hobby projects and general workshop use where moderate clamping strength and reach are required.

Advantages

The bar clamp provides even pressure distribution along the jaw faces to reduce movement of parts during bonding and positioning. A quick-adjust sliding jaw enables rapid set-up and single-handed operation in many situations. Constructed from durable materials, the clamp resists deformation under rated load and maintains alignment for repeated use. The compact footprint and moderate clamping force balance ease of handling with adequate holding power for common shop and DIY applications.

Suitable for

• Wood gluing and panel assembly
• Light carpentry and trim work
• Fixture holding for drilling and sanding
• Hobby and model making projects
• Temporary holding during finishing or painting

Key specifications

• Clamping capacity: 300 x 500 mm reach
• Rated clamping force: 60 kg
• Bar material: hardened steel (rigid bar for consistent pressure)
• Jaw type: fixed and adjustable sliding jaw with quick-release
• Operation: manual screw/lever adjustment for final tightening
• Finish: corrosion-resistant coating on metal components
• Weight and dimensions: compact design suitable for bench or portable use

How to use

Position the fixed jaw against one side of the workpiece and slide the adjustable jaw along the bar until it contacts the opposite side. Use the quick-release to move the sliding jaw into approximate position, then apply the screw or lever tightening mechanism to reach the desired clamping pressure. Ensure the clamped surfaces are aligned before applying full force. For glue-ups, maintain even pressure across the joint and avoid over-tightening which can squeeze out adhesive or deform thin materials. Release the clamp by reversing the screw or operating the quick-release to slide the jaw away from the workpiece.

Usage recommendations

Use protective pads on the jaws when clamping finished surfaces to prevent marring. For repeatable setups, mark bar positions or use stops to ensure consistent spacing. Do not exceed the rated clamping force of 60 kg and inspect the clamp for wear or damage before each use to maintain safe operation.