RCA (Cinch) audio cable kruger & matz KM1210 — 2xRCA to 2xRCA, 10 m, gray

The kruger & matz KM1210 RCA (Cinch) audio cable is an unbalanced analogue connection cable designed to link stereo audio equipment over a 10 metre distance. The cable has two RCA connectors at each end and a gray outer jacket, providing a simple and standard connection method for consumer and semi-professional audio devices. It is suitable for passing left and right channel signals between CD players, amplifiers, receivers, mixers and DJ controllers where a longer lead is required.

Advantages

This RCA cable provides a standardized stereo connection for analogue audio with two RCA plugs on each end for left and right channels, allowing direct connection between most consumer audio components. The 10 m length enables flexible placement of devices across a room or between racks while retaining a single-cable solution for both channels. The gray jacket offers a neutral appearance that blends with home and studio setups.

Suitable for

• Connecting CD players, cassette decks or media players to amplifiers and receivers
• Linking mixers, DJ controllers or outboard audio gear to power amplifiers or recorders
• Temporary or permanent wiring in home audio systems and small project studios requiring 10 m runs

Key specifications

• Connector type: 2 x RCA to 2 x RCA (stereo analogue)
• Cable length: 10 metres
• Cable type: unbalanced analogue audio
• Outer jacket colour: gray

How to use

Connect one pair of RCA plugs to the left and right output sockets of your source device and the other pair to the corresponding input sockets of the destination device, ensuring correct channel alignment. Insert plugs fully to establish a secure connection. Route the cable to avoid sharp bends, kinks and proximity to mains cabling or strong electromagnetic sources to minimize noise pickup. For installations spanning long distances, keep connections as short as practical at each device and check levels after connection.

Usage recommendations

Use this 10 m RCA cable for analogue stereo signal paths where balanced cabling is not required. For critical or professional installations sensitive to interference, consider using balanced audio connections or shorter cable runs when possible. Inspect connectors for secure fit and replace the cable if the jacket or plugs show significant wear.