Screwdriver Bit KWB Inox 125102 PH2 25mm

The KWB Inox screwdriver bit 125102 is a stainless steel PH2 bit with a length of 25 mm and a 1/4" (6.3 mm) hex shank. It is made for use with power tools and hand drivers where corrosion resistance and consistent performance are required for stainless steel screw connections.

Advantages

The bit is manufactured from stainless steel and features a torsion zone that absorbs peak loads to extend tool life under demanding conditions. Mega Grip Ribs reduce cam-out by improving contact between bit and screw head, which helps preserve both the bit and screw. Colour-coded rings allow quick identification of the PH2 profile.

Suitable for

• Driving PH2 screws in stainless steel fastenings
• Outdoor and corrosive environments
• Use with cordless and corded power drivers and manual bit holders

Key specifications

• Tip profile: PH2 (Phillips)
• Length: 25 mm
• Material: stainless steel
• Shank: 1/4" (6.3 mm) hex
• Torsion zone for improved durability
• Colour-coded ring for head identification

How to use

Insert the 1/4" hex shank into the tool’s bit holder or chuck until it seats securely. Align the PH2 tip with the screw head and apply steady pressure while driving at appropriate speed for the screw and material. The torsion zone will flex under overloads to reduce breakage; avoid excessive lateral force to maintain tip geometry.

Usage recommendations

For best results when fastening stainless steel screws outdoors, use moderate torque settings and check fit between bit tip and screw head before driving. Replace the bit when tip wear becomes noticeable to prevent damage to screw heads.