LangeLight hermetic luminaire 38W 4000K 4200 lm L1200 mm IP65 230V polycarbonate

LangeLight hermetic luminaire 38W 4000K 4200 lm L1200 mm IP65 230V polycarbonate is a sealed LED fixture designed for reliable general illumination in damp, dusty or wash-down environments. The 38W LED module produces approximately 4200 lumens at a neutral white 4000K color temperature and is housed in a 1200 mm polycarbonate body with an IP65 rating, providing protection against dust ingress and low-pressure water jets. The luminaire operates from a 230V supply and is intended for fixed mounting in garages, stairwells, utility rooms, warehouses and similar indoor and covered outdoor spaces requiring consistent, maintenance-friendly lighting.

Advantages

The hermetic design and IP65 protection reduce the need for frequent maintenance and protect internal components from dust and moisture. Polycarbonate housing offers impact resistance and simplifies cleaning while maintaining light transmission. The neutral white 4000K color temperature supports clear visibility and color rendition for general tasks. Low power consumption at 38W with an output around 4200 lm provides an efficient balance of light output and energy use, suitable for continuous operation.

Suitable for

• Garages and car parks
• Stairwells and corridors
• Utility rooms and service areas
• Warehouses and industrial aisles
• Covered outdoor walkways and loading zones

Key specifications

• Rated power: 38W
• Light output: ~4200 lm
• Color temperature: 4000K (neutral white)
• Length: 1200 mm
• Housing material: polycarbonate
• Ingress protection: IP65 (dust tight, protected against water jets)
• Supply voltage: 230V
• Mounting: fixed surface or suspended mounting options (requires appropriate accessories)

How to use

Install the luminaire on a stable surface or suspend it from a suitable support following local electrical codes and safety practices. Ensure the mains supply is disconnected before wiring. Connect the luminaire to a 230V supply using properly rated cable and secure cable entry to maintain the IP65 seal. After installation, switch on the supply and verify correct operation and uniform light distribution. For cleaning, disconnect power and wipe the polycarbonate housing with a soft cloth and mild detergent; avoid abrasive cleaners or solvents that can damage the surface.

Usage recommendations

Use this luminaire where consistent, maintenance-reducing lighting is required. To preserve the IP65 protection, ensure cable glands and mounting interfaces are correctly sealed and replace the luminaire if the housing is cracked or heavily scratched. For optimal performance in high-bay or very dusty environments, consider routine inspection intervals to remove accumulated surface dirt and verify electrical connections.