Outdoor light with motion sensor led line PHOTON 203488 20W 2000 lm

Outdoor light with motion sensor led line PHOTON 203488 is a professional, fully waterproof LED floodlight designed for exterior illumination of buildings, facades and industrial halls. The fixture delivers 2000 lm at 20 W (4000 K) with an efficient die-cast aluminium housing and tempered glass cover, and its structural design ensures effective heat dissipation. The lamp includes an integrated PIR motion sensor with adjustable daylight and time parameters and is suitable for surface mounting (IP65, IK05).

Advantages

This LED floodlight provides high luminous efficacy (100 lm/W) and a neutral white colour temperature (4000 K) with a colour rendering index Ra of 80. Built-in PIR sensor enables automatic activation on motion; sensor parameters include adjustable light-level (5–2000 lx) and time delay (10 seconds to 10 minutes). Robust materials (die‑cast aluminium housing, tempered glass) and IP65 protection make the product suitable for outdoor use, while a long rated lifetime (L70B50 = 30000 h) and up to 18,000 switching cycles support reliable operation.

Suitable for

• Illumination of building exteriors and facades
• Industrial halls and loading areas
• Entrances, driveways and patios
• Garden paths and perimeter lighting

Key specifications

• Wattage: 20 W
• Luminous flux: 2000 lm
• Correlated colour temperature: 4000 K
• Luminous efficacy: 100 lm/W
• Beam angle: 120°
• Colour rendering index (Ra): 80
• Colour consistency: ≤6 McAdam ellipses
• Energy efficiency class: F (2019/2015)
• Supply voltage: 220–240 V AC, 50/60 Hz
• Current: 0.09 A
• Power factor: 0.7
• Standby power: 0.5 W
• Sensor: PIR motion sensor (measuring range 0.5–8 m ±2 m, detection max 8 m)
• Sensor daylight range: 5–2000 lx
• Sensor time delay: 10 s–10 min
• Dimmable: No
• LED type / quantity: SMD2835 / 28 LEDs
• Lifetime L70B50: 30,000 h
• On/off cycles: 18,000
• Wiring: 3‑wire, single wire thickness 1 mm²
• Mounting: Surface
• Cover material: Tempered glass
• Housing material: Die‑cast aluminium
• Colour: Black
• IEC protection class: I
• IP rating: IP65
• IK rating: IK05
• Operating ambient temperature: -20 ÷ 40 °C
• Dimensions: 120 × 62 × 153 mm
• Weight: 251 g

How to use

Mount the PHOTON 203488 on a stable vertical surface using appropriate fasteners for the installation substrate. Connect the supply to 220–240 V AC following local electrical regulations and ensure correct wiring (3‑wire). Adjust the PIR sensor settings: set the daylight threshold between 5 and 2000 lx and the time delay between 10 seconds and 10 minutes to match the required operation. The light is not dimmable; the sensor will switch the fixture on automatically when motion is detected within the specified range.

Usage recommendations

For optimal sensor performance, install the fixture at the recommended mounting height of 2.3–5.0 m, avoid mounting facing direct sources of heat or reflective glass, and position to cover the desired detection area (max 8 m). Regularly check wiring and seals to maintain IP65 protection and clean the tempered glass cover to ensure consistent light output.