LED luminaire, led line FRAME 60x60, 40W, 3200 lm, 4000 K

LED luminaire led line FRAME 60x60 is a recessed panel designed for general interior lighting. It delivers 3200 lm at 40 W with a neutral daylight colour temperature of 4000 K and fits standard 60×60 cm ceiling grids. The fixture uses SMD LEDs and an isolated LIFUD driver to provide uniform, energy-efficient illumination suitable for offices, retail and public interiors.

Advantages

The panel offers high luminous efficacy with 3200 lm from 40 W, a colour rendering index above 80 and a CRI that supports accurate colour perception. The built-in LIFUD isolated driver ensures stable, no‑flicker performance and the product is designed for a long service life of up to 30,000 hours. It is compatible with standard recessed 600×600 mm ceiling modules and provides a wide 120° beam angle for broad light distribution.

Suitable for

• Office spaces and conference rooms
• Retail stores and showrooms
• Educational and public buildings
• Corridors and common areas

Key specifications

• Power: 40 W
• Luminous flux: 3200 lm
• Colour temperature: 4000 K (daylight/neutral)
• LED type: SMD
• Driver: LIFUD isolated, no-flicker
• CRI (Ra): >80
• Beam angle: 120°
• Input voltage: 175–250 V
• Dimensions: 591 × 591 mm (fits 60×60 cm grid)
• Weight: 890 g
• Life span: 30,000 hours (luminous flux after 30,000 h: 0.7 of initial)
• Number of on/off cycles: 50,000
• Warm-up time to 60%: 1 s
• Reaction time: >0.5 s
• Dimmer compatibility: No
• Collective package: 10 pcs

How to use

Install the luminaire into a standard 600×600 mm suspended ceiling grid as a recessed panel. Ensure mains power is within the rated 175–250 V range and follow local electrical regulations. Connect the LIFUD driver to the supply, secure the panel in the grid, and test for stable, no‑flicker operation. Do not use with dimming systems because the unit is not dimmer compatible.

Usage recommendations

For best lifetime and performance, operate the panel in indoor environments with appropriate ventilation and ambient temperatures within manufacturer limits. Avoid installation in locations exposed to moisture or extreme temperatures; replace units when luminous output drops significantly below initial levels.