LEDLIFE LED strip COB 12W 840 10 mm 110 lm/m 5 m

LEDLIFE LED strip COB 12W 840 10 mm 110 lm/m 5 m is a continuous COB (chip-on-board) LED tape designed to deliver uniform, shadow-free illumination for a variety of interior lighting tasks. With a total power of 12 W over its 5 m length and a neutral white color temperature in the 4000 K range, this LED strip is intended for general lighting, under-cabinet installations, display illumination and accent lighting where even light distribution and a narrow profile matter. The product requires a compatible low-voltage constant-voltage driver and an appropriate mounting surface; cutting and mounting should follow manufacturer guidance.

Advantages

The COB design produces smooth, continuous light without visible point sources, reducing spotting and creating a more uniform appearance compared with traditional LED strips. At 10 mm width the strip fits into slim profiles and channels while providing a linear luminous flux of approximately 110 lumens per meter. The neutral white 4000 K color temperature supports accurate color rendering for general-purpose environments and balancing warmth and coolness in interior spaces. The flexible 5 m length allows runs for longer runs with fewer connections when installed with the correct driver and mounting accessories.

Suitable for

• Under-cabinet task lighting in kitchens and workspaces
• Display and showcase illumination for retail and exhibitions
• Cove and indirect lighting to create uniform ambient light
• Accent lighting in furniture profiles and architectural channels

Key specifications

• Power consumption: 12 W (total for 5 m length)
• Color temperature: neutral white around 4000 K (840)
• Luminous flux: approx. 110 lm per meter
• Width: 10 mm
• Length: 5 m continuous tape
• COB (chip-on-board) continuous LED construction for even light output
• Requires compatible low-voltage constant-voltage driver (12 V or 24 V depending on strip variant) and appropriate mounting surface

How to use

Measure the installation run and plan power feed points to minimize voltage drop. Cut the strip only at the indicated cut points and prepare the mounting surface by cleaning and drying it. Use an appropriate constant-voltage driver sized for the total wattage plus a safety margin, and make electrical connections according to polarity and local electrical regulations. Mount the strip into a compatible channel, profile, or directly to a stable surface using the adhesive backing or mechanical clips where applicable. Ensure adequate heat dissipation by avoiding installation on heat-sensitive materials and allowing airflow around the mounting channel.

Usage recommendations

Use a driver that matches the strip voltage and offers at least 20% extra capacity over the strip’s total wattage. For long runs, consider multiple feed points or higher-voltage options to reduce voltage drop and maintain consistent luminous output across the length. When installing in enclosed profiles, choose aluminum channels for improved heat dissipation and use a diffuser for softer visual appearance.