LED strip LEMLUX COB 30m, 24V DC, 6W/m, 480 LED/m, 720 lm/m, neutral white 4000K, IP20, 180°

LEMLUX COB 30m is a continuous-output LED strip designed for indoor linear and accent lighting applications. The strip runs on 24V DC and consumes 6 W per meter. With a high-density COB arrangement equivalent to 480 LED points per meter, it produces approximately 720 lm per meter at a neutral white color temperature of 4000K and provides a wide 180° beam for even illumination. The IP20 rating indicates suitability for dry interior environments where a seamless, uniform light appearance is required.

Advantages

The LEMLUX COB strip delivers consistent, continuous light with minimal visible hotspots due to its dense chip-on-board construction. Energy consumption is moderate at 6 W/m while offering a relatively high lumen output, making it efficient for task and accent applications. Operating at 24V DC simplifies power distribution over longer runs and reduces voltage drop compared with lower-voltage strips. The neutral white 4000K output provides a balanced color tone suitable for general-purpose indoor lighting.

Suitable for

• Under-cabinet and countertop lighting in kitchens and workspaces
• Continuous cove, pelmet or linear architectural lighting
• Retail displays and shelving requiring even, shadow-free illumination
• Task lighting in offices, studios, or workshop benches
• Accent lighting for dry interior environments such as living rooms and corridors

Key specifications

• Length: 30 m reel
• Supply voltage: 24 V DC
• Power consumption: 6 W per meter
• Light output: ~720 lumens per meter
• Color temperature: 4000 K (neutral white)
• LED density: COB equivalent of 480 points per meter
• Beam angle: 180° for wide, even illumination
• Protection rating: IP20 (indoor, dry locations)

How to use

Install the LEMLUX COB strip on a clean, dry, and sufficiently rigid mounting surface that provides appropriate heat dissipation. Measure and cut the strip only at designated cut points, then connect to a compatible 24 V DC constant-voltage power supply sized to handle the total wattage of the run (total meters × 6 W). Use proper connectors or soldered joints to ensure secure electrical connections and observe polarity. Avoid bending the strip sharply; follow manufacturer minimum bend radius guidance where available. For long runs, plan power injection points to maintain consistent brightness along the length.

Usage recommendations

Use a power supply with at least 10–20% headroom above the calculated load to ensure reliable operation and longer component life. Do not use this IP20-rated strip in damp or outdoor locations. For installations requiring diffusion and a uniform visible surface, pair the strip with an appropriate aluminum profile and opal diffuser to minimize the appearance of the LED array.