LED strip 5m reel LEMLUX, 24V, 11W/m, COB 480 LED/m, 1000 lm, warm white 2700K, IP20, 180°

LEMLUX 5 m LED strip on a reel is a 24 Vdc linear lighting solution engineered for indoor accent and ambient lighting. The tape uses COB (chip-on-board) construction with a high LED density of 480 LEDs per metre to produce an even, continuous light output of approximately 1000 lm per metre at a warm white 2700 K color temperature. Rated at 11 W per metre and offering a 180° beam angle, this IP20 strip is intended for installations where a smooth, warm linear light is required, such as under cabinets, shelving, coves or decorative profiles.

Advantages

The COB design delivers a uniform, shadow-free light line without visible point sources, improving visual continuity in coves, cabinets and architectural accents. Low power consumption of 11 W/m combined with 24 Vdc operation enables efficient runs with reduced voltage drop compared with lower-voltage alternatives. Warm white 2700 K provides a comfortable, warm tone suitable for residential and hospitality interiors. The reel format and flexible substrate simplify handling and installation in continuous runs up to the length provided.

Suitable for

• Under-cabinet and shelf lighting in kitchens and living areas
• Accent lighting in hospitality and retail displays
• Continuous cove and profile installations requiring a warm, even light line
• Ambient and decorative illumination in residential interiors

Key specifications

• Length: 5 metres
• Nominal voltage: 24 Vdc
• Power consumption: 11 W per metre
• LED density: 480 LEDs per metre (COB construction)
• Luminous flux: approximately 1000 lumens per metre
• Correlated color temperature: 2700 K (warm white)
• Beam angle: 180°
• Ingress protection: IP20 (indoor use only)
• Form factor: flexible reel-mounted LED strip

How to use

Plan the layout accounting for the 24 Vdc supply and the total length of continuous runs to avoid excessive voltage drop. Cut only at manufacturer-designated cutting points and observe correct polarity when making connections. Mount the strip onto a clean, dry surface or into compatible aluminium profiles for improved thermal management and mechanical protection. Use a suitable 24 Vdc constant-voltage power supply sized to cover the total wattage plus a safety margin. Avoid exposure to moisture and outdoor conditions due to the IP20 rating.

Usage recommendations

For optimal light quality and longevity, install the strip on aluminium channels with diffusers to provide heat sinking and a softened, uniform luminous line. Calculate power supply capacity as total metres × 11 W plus about 10–20% margin. When running longer distances, consider parallel feeds or multiple power injection points to maintain uniform brightness along the strip.