LED strip 5m reel LEMLUX COB 5V 13W/m 160LED/m RGB IP20 WS2811 80pix/m

LEMLUX COB 5V 13W/m LED strip on a 5 m reel combines a dense COB light-emitting surface with integrated WS2811 digital control. The strip has 160 LEDs per metre and provides 80 addressable pixels per metre, running from a 5 V DC supply and consuming 13 W per metre. With RGB colour mixing and pixel-level control, the product is designed for indoor accent, decorative and indirect lighting where smooth, continuous light and dynamic colour effects are required. The IP20 rating indicates suitability for dry indoor environments.

Advantages

The COB construction produces a continuous-looking light line with reduced visible LED dots compared to discrete LED strips. Integrated WS2811 digital IC allows individual pixel control along the strip, enabling complex RGB animations and precise colour placement. Low-voltage 5 V operation supports compatibility with common digital LED controllers and power supplies. The 5 m reel format simplifies linear installations while the 13 W per metre power consumption provides a balance between brightness and energy use.

Suitable for

• Indoor accent lighting for coves, shelves and display cases
• Decorative and architectural indirect lighting with dynamic colour effects
• Pixel-mapped installations for signage, art and stage backlighting
• Under-cabinet lighting where RGB control and smooth light are desired

Key specifications

• Length: 5 metres (reel)
• LED density: 160 LEDs per metre
• Pixel density: 80 addressable pixels per metre
• Power consumption: 13 W per metre
• Operating voltage: 5 V DC
• Colour capability: RGB with WS2811 digital control
• Ingress protection: IP20 (indoor use)
• Construction: COB (chip-on-board) continuous light surface

How to use

Install the strip on a clean, dry, and sufficiently rigid mounting surface following the manufacturer's mounting guidelines. Connect the 5 V DC power supply and a compatible WS2811-capable controller according to wiring polarity and controller instructions; ensure the power supply can deliver the required current for the total run length (13 W per metre). For reliable pixel control, use appropriate data cabling and, if needed, inject power at intervals to prevent voltage drop over the 5 m run. Cut only at designated cut points if a shorter length is required and terminate the end to protect the circuit.

Usage recommendations

Use the strip in dry indoor environments only. Verify controller compatibility with WS2811 addressable protocol and choose a power supply with sufficient headroom. For long installations or high brightness settings, consider additional power injection points to maintain colour accuracy and brightness along the entire length.