LED strip 5 m reel LEMLUX COB-11WWW480-24, 24V DC, 11 W/m, COB 480 LED/m, 1000 lm/m, 2700K warm white, IP20, 180°

LEMLUX LED strip 5 m reel COB-11WWW480-24 is a flexible linear lighting element designed for indoor ambient and accent illumination. Operating at 24 V DC and consuming 11 W per metre, this COB strip integrates 480 LED emitters per metre to produce approximately 1000 lm/m at a warm white 2700 K color temperature. With an 8 mm width, 50 mm cut intervals and a 180° beam distribution, the strip is intended for concealed linear installations, under-cabinet lighting and other interior applications where a warm, continuous light line is required. The product carries a five-year warranty and is rated IP20 for dry indoor environments.

Advantages

The COB (chip on board) construction delivers a smooth, continuous light output with reduced visible dotting compared to discrete-LED strips. High luminous efficiency of about 91 lm/W ensures effective light output at moderate power consumption. The 2700 K color temperature provides a warm, inviting tone suitable for residential and hospitality interiors. A narrow 8 mm profile allows integration into slim aluminum channels or tight mounting spaces, while the 5 m reel length minimises joins for longer runs.

Suitable for

• Under-cabinet and under-shelf lighting in kitchens and workspaces
• Accent and cove lighting to create continuous warm white lines
• General ambient lighting in living rooms, bedrooms and hospitality areas
• Integration into slim profiles and channels for concealed linear illumination

Key specifications

• Operating voltage: 24 V DC
• Power consumption: 11 W per metre
• Light color: 2700 K (warm white)
• Luminous flux: ~1000 lm per metre
• LED density: 480 emitters per metre (COB format)
• Strip width: 8 mm
• Cut interval: 50 mm
• Beam angle: 180°
• Protection rating: IP20 (indoor, dry locations)
• Reel length: 5 metres
• Manufacturer warranty: 5 years

How to use

Plan the installation length and power supply requirements before cutting the strip at designated 50 mm intervals. Ensure a compatible 24 V DC constant-voltage driver is used with sufficient wattage margin for the total length (11 W/m). Mount the strip onto a clean, dry surface or into an aluminium profile for improved heat dissipation and a uniform light appearance. Make electrical connections using appropriate soldering or connector methods rated for LED strips, observing polarity. Avoid exposure to moisture and do not install the IP20-rated strip in wet or outdoor locations.

Usage recommendations

For best visual uniformity and thermal performance, install the LED strip inside an aluminium channel with a diffuser and ensure the power supply is rated at least 20% above calculated load. Use a 24 V constant-voltage driver with proper overload protection and follow local electrical safety standards during installation.