LED light strip LEMLUX COB-14NW528-24 — 5 m, 24 Vdc, 14 W/m, COB 528 LED/m, 1680 lm/m, 4000K, IP20

LEMLUX COB-14NW528-24 is a 5 m COB LED strip engineered for continuous, uniform interior illumination. Operating at 24 Vdc with a linear power draw of 14 W per meter and a COB layout of 528 LEDs per meter, the strip provides approximately 1680 lm per meter at neutral white 4000 K. With an IP20 rating and a 10 mm strip width, it is intended for dry indoor installations where seamless, even light is required, such as profiles, coves, cabinets and work surfaces.

Advantages

The COB design produces smooth, glare-minimised light without visible point sources, enabling continuous illumination along runs. High luminous flux and 120 lm/W efficiency deliver substantial light output at moderate power consumption. A 5 m reel length and standard 45.45 mm cut intervals simplify installation and customizing to length. The product includes a five-year warranty, making it suitable for professional interior lighting projects that require consistent colour rendering and dependable operation.

Suitable for

• Under-cabinet and cabinet interior lighting
• Cove, linear profile and ceiling profile illumination
• Task lighting for worktops and desks
• Primary or supplementary general lighting in dry indoor spaces

Key specifications

• Length: 5 metres
• Supply voltage: 24 Vdc
• Power consumption: 14 W per metre
• LED arrangement: COB, 528 LEDs per metre
• Luminous flux: ~1680 lm per metre
• Correlated colour temperature: 4000 K (neutral white)
• Photometric efficiency: 120 lm/W
• Strip width: 10 mm
• Cutting interval: every 45.45 mm
• Ingress protection: IP20 (for dry indoor use)
• Warranty period: 5 years

How to use

Measure and plan the required run length, taking into account the 45.45 mm cut intervals. Prepare a stable 24 Vdc constant-voltage power supply sized to cover the total wattage (14 W/m times the number of meters used) and use appropriate connectors or soldering for reliable electrical connections. Mount the strip in a dry indoor location on a clean, flat surface or inside compatible aluminium profiles for heat dissipation and a finished appearance. Observe polarity when connecting and avoid exceeding the rated supply voltage.

Usage recommendations

For optimal performance, install the strip on aluminium profiles or other thermally conductive channels to improve heat dissipation and prolong lifetime. Use a 24 Vdc power supply with adequate wattage and a safety margin of at least 10–20%. Avoid moist or outdoor environments due to the IP20 rating. If long runs are required, consider multiple feed points to minimise voltage drop and maintain uniform brightness.