LED light strip LEMLUX COB-14WW480-24HE, 5 m reel, 24 V DC, 14 W/m, COB 480 LED/m, 3000K, IP20

LEMLUX COB-14WW480-24HE is a 5 m reel LED light strip designed for linear and accent indoor illumination. Operating at 24 V DC with a power consumption of 14 W per meter and a high-density COB array of 480 LEDs per metre, the strip delivers approximately 1890 lm per metre at a warm white 3000K colour temperature. With IP20 protection and a 180° beam angle, this LED strip is intended for installation in dry indoor locations such as cabinets, shelves, coves and ceiling profiles where continuous, uniform light is required.

Advantages

The continuous COB emitter design provides even, shadow-free light distribution ideal for visible linear installations and indirect lighting. High luminous output and an efficiency of around 135 lm/W allow the strip to be used for both accent and primary illumination in confined indoor spaces. The 24 V DC operating voltage reduces voltage drop across longer runs, and the 5 m reel format supports easier planning and installation for standard interior projects.

Suitable for

• Under-cabinet and shelf lighting in kitchens and workshops
• Perimeter and cove lighting in living rooms and offices
• Illuminating ceiling profiles and recessed channels
• Task lighting for workbenches and display cases
• Continuous linear lighting where uniform warm white light is required

Key specifications

• Operating voltage: 24 V DC
• Power consumption: 14 W per metre
• LED density: 480 LEDs per metre (COB emitter)
• Approximate luminous flux: 1890 lm per metre
• Colour temperature: 3000 K (warm white)
• Beam angle: 180°
• Ingress protection: IP20 (for indoor, dry locations)
• Strip width: 10 mm
• Recommended cut interval: 50 mm
• Reel length: 5 metres
• Manufacturer warranty: 5 years

How to use

Measure the installation channel or surface and cut the strip only at the marked 50 mm intervals. Connect the strip to a compatible 24 V DC constant voltage power supply with sufficient power capacity for the total length (14 W per metre). Fix the strip into place using an appropriate aluminium profile, diffuser or mounting tape, ensuring good thermal contact for longer runs. Observe polarity when making electrical connections and avoid installing the strip in wet or outdoor locations due to its IP20 rating.

Usage recommendations

For optimal performance and lifetime, use a 24 V DC power supply rated at least 10 % above the calculated load to avoid running at maximum capacity. Install the strip in aluminium channels with diffusers to achieve uniform light and improved thermal management. Avoid folding or sharp bending; follow the specified minimum bend radius and cut only at the designated intervals.